Wildguzzi.com

General Category => General Discussion => Topic started by: 750S3 on August 30, 2017, 08:38:11 PM

Title: Shark fin Silentium baffle
Post by: 750S3 on August 30, 2017, 08:38:11 PM

I am missing one the conical baffle that fits on the end of the shark fin Silentium pipe. Anybody has a one or know where I can get it.
Many thanks

Title: Re: Shark fin Silentium baffle
Post by: canuck750 on August 30, 2017, 10:19:46 PM

The baffle is integral to the muffler, there are screws on the outside of the muffler that would appear to hold the baffle but I have cut a damaged pipe open and the baffle is welded to the outer body. There were several manufacturers and depending on the make the baffle design is not the same. I have several smooth end shark gills, original style and there are at least three different baffles.

Title: Re: Shark fin Silentium baffle
Post by: 750S3 on August 31, 2017, 08:41:49 AM

Thanks Jim, that's what I suspected. The missing part is the last conical bit, I will see if I can get one made by my friendly metal fabricator.