Wildguzzi.com
General Category => General Discussion => Topic started by: bpreynolds on August 31, 2017, 11:07:31 AM
-
Here's an odd question for you. In my endless search to make the Roamer and my damaged discs get along better I am considering purchasing some adjustable pegs. I see several options out there for the Griso (from Knight Design and others) and it makes me wonder if the peg connection (clevis) is the same size across the line? This morning on the Roamer I measure just very slightly under an inch? Does anyone with Griso here know this answer or could measure for me?
(https://farm5.staticflickr.com/4364/36941533715_9f059d8a22_k.jpg) (https://flic.kr/p/Yhp1X6)IMG_20170831_120141_resized_20170831_120219920 (https://flic.kr/p/Yhp1X6) by Brian (https://www.flickr.com/photos/flickr_bri/), on Flickr
-
I'd be surprised if they were different but I'll try and remember to stick a ruler across them today.
If no one else comes up with an answer feel free to nag, I've got a bit on at the moment.
Pete
-
I'd be surprised if they were different but I'll try and remember to stick a ruler across them today.
If no one else comes up with an answer feel free to nag, I've got a bit on at the moment.
Pete
That'd be awesome. Thanks, Pete.
-
My Harbor Freight digital caliper says the inside measurement between the flats is about 0.91 inches, 117/128 inches, or 23.2mm. The mounting axis is inclined about 30 degrees up from horizontal, toward the front of the bike. This is for my 2007 G11.
Moto