Wildguzzi.com

General Category => General Discussion => Topic started by: wirespokes on October 17, 2017, 06:00:19 PM

Title: 2000 Jackel common frame rails to 1997 Cali?
Post by: wirespokes on October 17, 2017, 06:00:19 PM

I'd like to hear from anyone who might know if the 2000 Jackal will accept lower frame rails from a 97 Cali.

A swap is being considered in order to change from floorboards to pegs or vice versa.

Thanks for your help!

Title: Re: 2000 Jackel common frame rails to 1997 Cali?
Post by: guzzisteve on October 17, 2017, 06:26:36 PM

I think they are the same, but have not switched them myself.

Title: Re: 2000 Jackel common frame rails to 1997 Cali?
Post by: rodekyll on October 17, 2017, 06:30:00 PM

Assuming the kickstand is where you want it, yes.  Should be a drop-in.

Title: Re: 2000 Jackel common frame rails to 1997 Cali?
Post by: oldbike54 on October 17, 2017, 06:31:29 PM

Quote from: guzzisteve on October 17, 2017, 06:26:36 PM

I think they are the same, but have not switched them myself.

 If the 97 Cali lower rails are like the '00 Cali rails it will be a straight swap .

 Dusty

Title: Re: 2000 Jackel common frame rails to 1997 Cali?
Post by: fotoguzzi on October 17, 2017, 06:40:35 PM

yes they will fit perfect.

Title: Re: 2000 Jackel common frame rails to 1997 Cali?
Post by: rudyr on October 18, 2017, 07:04:48 PM

I bought a pair of lower rails from Frank a couple years ago.  Payed guzzi dealer in Tulsa ok...  It takes about 5 hr.  Don�t know but it was older. Rudyr .

Title: Re: 2000 Jackel common frame rails to 1997 Cali?
Post by: wirespokes on October 18, 2017, 11:05:39 PM

Thanks, guys! I'm satisfied the swap will work.

Title: Re: 2000 Jackel common frame rails to 1997 Cali?
Post by: Tom on October 19, 2017, 12:08:53 AM

 :1: on the swap.  Have a '97 Cali 1000i.  Sold the Jackal.

Title: Re: 2000 Jackel common frame rails to 1997 Cali?
Post by: Ronkom on October 19, 2017, 10:03:29 AM

put floor boards from a '98EV on my Son's '03 Stone, no hassle. Also adapted Wixom bag mounts to put a pair of classic bags on the bike. A little cutting & welding but no big deal...Really look good
ronkom