Wildguzzi.com
General Category => General Discussion => Topic started by: giusto on October 30, 2017, 10:09:47 PM
-
Hello
I want to replace the OEM rear shocks on my sons 1984 V65C. 320mm.
Looking for information/options and suggestions.
Thanks
-
http://davequinnmotorcycles.com/cgi-bin/webc.cgi/HAGON_TWIN_SHOCKS.html
-
http://davequinnmotorcycles.com/cgi-bin/webc.cgi/HAGON_TWIN_SHOCKS.html
This .
Dusty
-
We put Hagon's on my son's V50-III and he said it made all the difference in the world.
They were relatively inexpensive along with the Racetech front springs and heavier oil weight.
He's 180 lbs.
Mark
-
:1: Hagons are perfect for early smallblocks. My 1980 V50II loves them.
-
Hagons work great for lighter bikes. I like Ikons for heavier machines.
-
I did the Hagons on mine too. Email Dave and tell him what you have and how much you weigh along with any cargo/passengers you may carry. He'll set you up.
-
Another Dave Quinn/Hagon fan here. The bottom end slightly-over-$200-per-pair ones work very well for me.
-
Thanks
I sent an email along to Quinn's
the sentiment seems unanimous
-
Anything is better than oem. :tongue:
-
For heavy duty use I like Hagon Nitros. Another Dave Quinn fan here.
-
Hagons from Dave Quinn:
(http://thumb.ibb.co/iCRiCb/hagons.jpg) (http://ibb.co/iCRiCb)
-
Depending on the bike HD shocks will work and you can get them cheap. Just measure.