Wildguzzi.com
General Category => General Discussion => Topic started by: slowmover on August 18, 2018, 11:35:55 AM
-
Been hearing a strange rattle at times in my 2013 Stone.Finally isolated it to the headlight.Took it apart and this fell out. I do not see it on the diagram.
(https://thumb.ibb.co/c7bYXe/D6_F21704_2_F97_45_D7_B04_B_563_D68481157.jpg) (https://ibb.co/c7bYXe)
Not the penny.
-
it's a penny! :laugh:
-
That's a flingulator dust excluder , a very important part as it keeps detritus out of the flingulator . Pleas don't operate the motorbike before replacing it properly , as a flingulator will not function properly if it gets covered in dust .
Dusty
-
Any evidence of internal threading?
Do you see any internal bolts or machine screws that are exposed and might have an OD similar to this tube's ID? Looks like a bushing or spacer that was used with a long bolt to make for a fixed mounting position.
Patrick Hayes
Fremont CA
-
No doesnt seem to fit anywhere-It is not even in the diagram- Probably disgruntled assemblyman.
-
Weebler pin bushing for the upgraded flingulator, No extra charge on that model :evil:
Paul B :boozing:
-
:laugh: :shocked: :huh:
Dusty
-
It's the part that makes the headlight rattling noise. Very important. The OEM version is pretty spendy, but Bosch sells the exact same part for Fiats and VWs for like 1/3 the price.
-
It's the part that makes the headlight rattling noise. Very important. The OEM version is pretty spendy, but Bosch sells the exact same part for Fiats and VWs for like 1/3 the price.
Yeah , except the Bosch part makes the bevel box leak :shocked: :huh:
Dusty
-
Been hearing a strange rattle at times in my 2013 Stone.Finally isolated it to the headlight.Took it apart and this fell out. I do not see it on the diagram.
(https://thumb.ibb.co/c7bYXe/D6_F21704_2_F97_45_D7_B04_B_563_D68481157.jpg) (https://ibb.co/c7bYXe)
Not the penny.
It is a spacer that goes over the screw that mounts the headlight ring to the shell, to prevent bending the ring if you over tighten the screw.
-
Don't use the BMW substitute. It'll make the bevel box burn
-
Winner jas67, had it on my 10 classic, kind of a pain to reinstall.
-
jas67, thanks