Wildguzzi.com

General Category => General Discussion => Topic started by: blackcat on September 20, 2018, 07:28:15 PM

Title: Zadi Key Blank Source
Post by: blackcat on September 20, 2018, 07:28:15 PM

Needed some blanks for my CX ignition and tank, so I found this source. Easy to match what I had based on the visuals and the order came within a few days.  Probably should have purchased five instead of two as it would have been cheaper in the long run.

http://mysecuritypro.com/ZD7.aspx

Title: Re: Zadi Key Blank Source
Post by: Chuck in Indiana on September 21, 2018, 10:25:23 AM

Here's another..
http://www.keys4classics.com/
http://www.keys4classics.com/html/MotoGuzzi.html

Title: Re: Zadi Key Blank Source
Post by: Kiwi_Roy on September 21, 2018, 11:34:34 AM

Its one thing getting key blanks for your CARC bike, it's another finding someone who can cut them.

When I finally found someone with a machine that would cut the inside out keys she had difficulty getting the machine set to cut the material thin enough.
She told me the Key Code for cutting is Z6025
You copy the chip in the bike of course.

Title: Re: Zadi Key Blank Source
Post by: antmanbee on September 21, 2018, 11:46:32 AM

I get mine here. They are 93 cents.

http://www.mrlock.com/manufacturers-1-1/jma-products/jma-key-blanks/jma-automotive-key-blanks/jma-key-blank-neiman-zd7-ne-30 (http://www.mrlock.com/manufacturers-1-1/jma-products/jma-key-blanks/jma-automotive-key-blanks/jma-key-blank-neiman-zd7-ne-30)

Title: Re: Zadi Key Blank Source
Post by: blackcat on September 21, 2018, 05:34:19 PM

Quote from: antmanbee on September 21, 2018, 11:46:32 AM

I get mine here. They are 93 cents.

http://www.mrlock.com/manufacturers-1-1/jma-products/jma-key-blanks/jma-automotive-key-blanks/jma-key-blank-neiman-zd7-ne-30 (http://www.mrlock.com/manufacturers-1-1/jma-products/jma-key-blanks/jma-automotive-key-blanks/jma-key-blank-neiman-zd7-ne-30)

Damn, those are cheap.....economica l.