Wildguzzi.com

General Category => General Discussion => Topic started by: ttietjen on November 17, 2018, 05:05:29 PM

Title: LOOP PARTS
Post by: ttietjen on November 17, 2018, 05:05:29 PM

Other than MG cycles and Harpers Moto Guzzi can anyone recommend more source's for loop frame parts?
Thanks
Tom 

Title: Re: LOOP PARTS
Post by: Turin on November 17, 2018, 05:48:04 PM

Scrambler Cycle, Moto Guzzi Classics, and Cycle Garden.

Title: Re: LOOP PARTS
Post by: EldoMike on November 17, 2018, 08:18:14 PM

New or used?

Title: Re: LOOP PARTS
Post by: giusto on November 17, 2018, 09:33:51 PM

Try Guzzino...and the old stand by...ebay...or maybe this website :)

Title: Re: LOOP PARTS
Post by: Rusty goose on November 17, 2018, 10:44:54 PM

MG Classics, Antietam Cycle

Title: Re: LOOP PARTS
Post by: ttietjen on November 18, 2018, 07:28:51 AM

Thanks Guys
Looking for a couple 4 speed Trans parts, first gear bushing & main shaft needle bearing.
Will give these places a try

Title: Re: LOOP PARTS
Post by: Fontain25 on November 18, 2018, 07:34:44 AM

EldoMike has all the USED parts you will need.

Title: Re: LOOP PARTS
Post by: John A on November 18, 2018, 09:40:12 AM

Quote from: Turin on November 17, 2018, 05:48:04 PM

Scrambler Cycle, Moto Guzzi Classics, and Cycle Garden.

I've had experience with Scrambler Cycle and I trust Kevin with any work he cares to take on. His schedule might be full, most excellent shops sometimes are.  http://www.scramblercycle.com/

Title: Re: LOOP PARTS
Post by: Antietam Classic Cycle on November 18, 2018, 10:10:11 AM

Quote from: ttietjen on November 18, 2018, 07:28:51 AM

Thanks Guys
Looking for a couple 4 speed Trans parts, first gear bushing & main shaft needle bearing.
Will give these places a try

"First gear bushing" - sure it's not the 4th gear bushing? That's the most commonly worn or fractured, 1st rarely is in my experience. I had Joe Kenny run off a batch of the 4th gear bushings, they are available from MG Cycle:
http://www.mgcycle.com/index.php?main_page=product_info&cPath=55&products_id=2738

#46 in this illustration is 1st gear, #55 is 4th. #47 and #56 are their bushings.

(https://thumb.ibb.co/eD1UVL/4-spd-gears-and-shafts.jpg) (https://ibb.co/eD1UVL)


MG Cycle is presently out of stock on the needle/roller bearing:
http://www.mgcycle.com/index.php?main_page=product_info&cPath=55&products_id=1436

Harper's may have it: http://www.harpermoto.com/03-roller-bearing-17x35x15.html