Bar end turn signals Eldo 1400

[Steve350f]

I'm considering getting the Moto Gadget bar end signals for my Eldo 1400.  Are the threaded plugs in the Eldo bars that hold the current end weights removable?  Didn't want to mess with them too much and jack them up.  Thanks 

[Zoom Zoom]

Looks like you may be blazing a new trail, much like the shield you brought up. I don't know the answer, but at least your thread will be bumped up.

John Henry

[Steve350f]

Looks like you may be blazing a new trail, much like the shield you brought up. I don't know the answer, but at least your thread will be bumped up.

John Henry

Ya, blazing the trail can get expensive tho.  Ha ha 

[Daleroso]

If they have the 8 sided outer that you can get a crescent wrench on they were no problem to remove off a V7III. I then installed 2 CRG 7/8" lane splitter mirrors.

[Tom]

How much wider would that make your bike?

[Steve350f]

How much wider would that make your bike?

None, they are no wider than the stock units.
https://www.revzilla.com/motorcycle/motogadget-m-blaze-disc-bar-end-led-turn-signal

These are in addition to the existing front turn signals, not to replace.

Still waiting on an answer on how to remove the existing plug if anyone knows.