Author Topic: LMIV - 1987 - fork seals and repair  (Read 838 times)

Offline bentombed

  • Hatchling
  • **
  • Posts: 35
LMIV - 1987 - fork seals and repair
« on: December 04, 2019, 07:04:12 PM »
Hello,

I need to replace the forkseals on my 87 lemans, the bike has the adjustable forks and stock big wheel. As far as i can tell, i should be able to remove the lower fork legs with the screw at the base, and refil the fork oil by removing the big nut on the top.  is that it? i cannot find a guide for this job anywhere. 
also how much fork oil and what weight will i need?   I have done this job a bunch of times on old BMWs but not with a guzzi cartridge forks.

thanks in advance

Offline Cdn850T5NT

  • Cdn850T5NT
  • Gaggle Hero
  • *****
  • Posts: 585
  • Location: Vancouver, BC Canada
Re: LMIV - 1987 - fork seals and repair
« Reply #1 on: December 05, 2019, 02:50:11 AM »
I have (from many years past... though not yet installed :( ) a set of Shraeder valves for the fork drains for my T5.  This allows me to use a syringe to fill the fork tubes with ATF (Dexron...) for my bike, through the fork drains.  I prefer this as loosening the nut up top requires slackening the upper triple clamp clamp-nut, and I don't want to do that.
1985 Eurospec 850 T5 NT (Nuovo Tipo - New Type... i.e. Series III)


NEW WILDGUZZI PRODUCT - Moto Guzzi Door Mat
Receive donation credit with door mat purchase!
Advertise Here
 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here