Author Topic: Too shiny not to share (Read 2418 times)

acguzzi · « **on:** December 21, 2020, 03:11:22 PM »

christmas has arrived

Perazzimx14 · « **Reply #1 on:** December 21, 2020, 03:20:35 PM »

Looks like it made out of liquid metal on T2 Judgment day

Turin · « **Reply #2 on:** December 21, 2020, 07:58:17 PM »

oooh. Who did that? droooool.

Tom H · « **Reply #3 on:** December 22, 2020, 12:15:42 AM »

That's way too pretty to install!!!!

As slick as it looks, you are going to use the rods with the oil hole in the big end right?

Tom

acguzzi · « **Reply #4 on:** December 22, 2020, 07:30:45 AM »

well I've got carillo rods and they don't have oil holes

the big performance gain though will be the psychological impact on the nut between the bars

acguzzi · « **Reply #5 on:** December 22, 2020, 07:33:24 AM »

it was done by Jesse Davis out in California

Dave Swanson · « **Reply #6 on:** December 22, 2020, 07:41:58 AM »

Quote from: acguzzi on December 21, 2020, 03:11:22 PM

christmas has arrived

WOW

Groover · « **Reply #7 on:** December 23, 2020, 08:29:22 AM »

What's that from?

acguzzi · « **Reply #8 on:** December 23, 2020, 08:37:38 AM »

it's for my LeMans, one of my bearings was out of spec so I decided to go the whole hog

keuka4884 · « **Reply #9 on:** December 23, 2020, 09:22:43 AM »

Beautiful! Looks like black nickel or black chrome.

rocker59 · « **Reply #10 on:** December 23, 2020, 09:33:24 AM »

Looks very fast!

Guzzistajohn · « **Reply #11 on:** December 23, 2020, 11:34:48 AM »

THat's a thing of beauty

craigclu · « **Reply #12 on:** December 25, 2020, 04:02:28 PM »

Careful, acguzzi.... They don't allow porn in here. What a gorgeous piece of work!

Turin · « **Reply #13 on:** December 25, 2020, 04:46:41 PM »

What else are you going to do? Cam? pistons?

kballowe · « **Reply #14 on:** December 25, 2020, 04:54:33 PM »

DANG !

Make a plaque and hang it on the wall.

It's art !

jwinwi · « **Reply #15 on:** December 25, 2020, 05:50:08 PM »

Quote from: acguzzi on December 23, 2020, 08:37:38 AM

it's for my LeMans, one of my bearings was out of spec so I decided to go the whole hog

Lightened, balanced and polished, yes?

moto-uno · « **Reply #16 on:** December 25, 2020, 07:10:26 PM »

How's the oil gonna stick to that

, Peter

acguzzi · « **Reply #17 on:** December 26, 2020, 02:01:54 PM »

lightened and balanced, still heavy, after all it is a Guzzi crank!!

acguzzi · « **Reply #18 on:** December 26, 2020, 02:06:40 PM »

it does have a B10 cam and 40mm carbs, I also took out the cyclinder base gasket for a little higher compression, but most of my focus has been on handling, I have maxton innards in a 40mm california fork, gazi shocks, 17 inch rims on spoked wheels, frame bracing, lighter rear disc and caliper and a few other unsprung weight reductions. It is a lot more stable deep into the corners.

News:

Author Topic: Too shiny not to share (Read 2418 times)

jwinwi