« previous next »
Pages: [1]   Go Down

Author Topic: Leaky butterfly. 1100 sporti  (Read 888 times)

Offline bigpants

  • Gaggle Mentor
  • ****
  • Posts: 415
Leaky butterfly. 1100 sporti
« on: June 02, 2021, 11:20:48 AM »
Just starting the process of fitting new bushes and seals in the rh throttle body . When I got the body off I held it upto the light and noticed this. Not the best photo but I think it shows my problem. There is a large crescent shaped gap at the bottom of the butterfly. I cannot persuede the butterfly down . Hmm.

Logged

Offline Tusayan

  • Gaggle Hero
  • *****
  • Posts: 1870
Re: Leaky butterfly. 1100 sporti
« Reply #1 on: June 03, 2021, 09:01:41 AM »
Make sure the right hand throttle body idle set screw has been backed out completely. It usually has been because it’s redundant, the left side idle screw should be the only one that’s used on the bike, but it’s worth checking.

« Last Edit: June 03, 2021, 03:04:38 PM by Tusayan »
Logged

Offline guzzisteve

  • Gaggle Hero
  • *****
  • Posts: 12953
  • "Just Ride It"
Re: Leaky butterfly. 1100 sporti
« Reply #2 on: June 03, 2021, 02:55:57 PM »
For a kit you might call Curtis Harper, I remember him working on that very subject.
Logged
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

Offline bigpants

  • Gaggle Mentor
  • ****
  • Posts: 415
Re: Leaky butterfly. 1100 sporti
« Reply #3 on: June 04, 2021, 02:26:14 AM »
Lucky Phil posted an excellent thread on bush and seal replacement . I'll change those and see how it looks after.
Logged
20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here
Pages: [1]   Go Up
« previous next »
 


NEW WILDGUZZI PRODUCT - Moto Guzzi Door Mat
Receive donation credit with door mat purchase!
Advertise Here