Looking for a Power Commander 3 usb

[Dragonknee]

Just curious if anyone might have a Power Commander 3 with the USB port for a V-11 Lemans. Thanks

[antmanbee]

I don't have a power commander but, if you are looking to cure your V11 running woes, on the V11 forum a member (meinolf) has made a great map that will make a v11 run perfectly. He shares it freely. You need cables and the Guzzidiag reader and writer programs to load it to your ECU. A set of cables runs about $30 or so.
A power commander is a half baked fix.

[guzzisteve]

If you want a PC3 it's best to look over at GT web forum. Todd sells the stuff and may have one in his classifieds.

[Dragonknee]

Thanks for the info, my buddy Jason Wallace is a the guru for this stuff up here and we were trying to use a map that he has on my bike. I will look at GT but I thought it was worth a shot to throw it up here

[Dragonknee]

I don't have a power commander but, if you are looking to cure your V11 running woes, on the V11 forum a member (meinolf) has made a great map that will make a v11 run perfectly. He shares it freely. You need cables and the Guzzidiag reader and writer programs to load it to your ECU. A set of cables runs about $30 or so.
A power commander is a half baked fix.

I'm gonna have to look that way if my efforts to find the PC3 is exhausted and futile... Thanks

[guzzisteve]

What I have for my EV is a Techlusion fuel box, it only changes the fuel pulse not ignition. Works real good, faster than one w/PC3.
I also run a MyECU on that bike that is perfected.  I shut off Techlusion then.

[Dragonknee]

What I have for my EV is a Techlusion fuel box, it only changes the fuel pulse not ignition. Works real good, faster than one w/PC3.
I also run a MyECU on that bike that is perfected.  I shut off Techlusion then.

Thanks for the info, I will look into it. Time will tell what I get done to it.