Exhaust Gasket, 2013 Stelvio??

[bobrebos1]

I was going to have an interested party look at my 2013 Guzzi Stelvio next week, and today while it was idling in my garage, when i reved it up a little pieces of exhaust gasket came out by where muffler meets exhaust on left side in area of foot peg kind of.  Is it a big job to replace this gasket??  Dealer charge maybe $500 or more?  Anybody know?

[guzzisteve]

Unbolt the clamp, not unbolt but loose. Unbolt muffler on back under seat. Slide muffler & pipe back twisting fitting. Clean & put on new packing, replace pipe & muffler, tighten clamp.
Look at bike, look at bolts & clamp, now can you do it? $0

Bob, that would only be 1/2hr at a shop.

[bobrebos1]

Unbolt the clamp, not unbolt but loose. Unbolt muffler on back under seat. Slide muffler & pipe back twisting fitting. Clean & put on new packing, replace pipe & muffler, tighten clamp.
Look at bike, look at bolts & clamp, now can you do it? $0

Bob, that would only be 1/2hr at a shop.

OK I can do that then.  Thanks

[guzzisteve]

The packing is same for Kawasaki at only a few bucks, do a search for it.

[Wayne Orwig]

I used the Kawasaki part, ordered on Amazon I think.
Not too bad a job.

[Ryan]

I ordered two so I would have one on hand when the other side let go, then buggered one up when I got impatient. So more spare, but it is a relatively simple repair. I would like to make a new gasket out of a soft metal (lead?) next time to see if it outlast the stock one.

[bobrebos1]

The packing is same for Kawasaki at only a few bucks, do a search for it.

Which Kawasaki model?  Is it a gasket or some kind of other material or,?  I can’t tell until I pull the exhaust back I guess

[bobrebos1]

Is this it?

https://www.af1racing.com/GU06123500-OEM-Guzzi-Header-to-Col--Exh-Gasket---GU06123500

[guzzisteve]

Guzzi PT# GU05128230          Never bought the Kaw, only installed them.      Don't know what they are made of, silvery, flaky, slick , not good for environment stuff.

https://www.af1racing.com/GU05128230-OEM-Aprilia-MG-60mm-Exhaust-Gasket---GU05128230

Kawi is less than 1/2 of that, if I remember.

Your # is for header to collector, mine is for collector to muffler pipe.

[leafman60]

Kawasaki 110601330

See this:

https://wildguzzi.com/forum/index.php?topic=71932.0

https://www.amazon.com/CALTRIC-Exhaust-KAWASAKI-11060-1330-11009-1680/dp/B01DYR4UGA/ref=sr_1_1?crid=12PIL3HDIGRVT&keywords=kawasaki+11060-1330&qid=1663469555&sprefix=kawasaki+11060-1%2Caps%2C628&sr=8-1