Throttle body to engine oetiker flame loose on my v7 stone

[UnpotatoedSalmon]

I was cleaning my bike when I noticed the clamp nearly loose on one side of the bike, I do not know how to remove the oetiker 545 clamp

[toomanybikes]

If it's loose, spin it around until you see the main clamping mechanism. If it's the same clamp as on my Audace (see pic), you can pry it off with a flat blade screwdriver. If it's as loose as you say, you may not even need to do this.

You are not supposed to re-use them, but it may be possible depending on the condition of the clamp.

[toomanybikes]

If you prefer you can get narrow worm drive clamps and replace the stickers.

I had a difficult time finding traditional clamps narrow enough (7mm) and large enough diameter (60mm).

[janguzzi]

I really do not like thos Oetiker at clamps at all.
I replaced some of them on my V85 TT with the classic Guzzi clamps (meanwhile hard to get) and with one from KTM

https://www.youtube.com/watch?v=75amQUlZV1o