Author Topic: V7 classic question  (Read 1609 times)

Offline pikipiki

  • Gaggle Mentor
  • ****
  • Posts: 476
  • Location: UK
V7 classic question
« on: October 11, 2015, 01:46:00 PM »
Can I ask how many bolts hold on the rear fender? Apart from 5 small bolts there are 2 holes each side for big bolts that also hold grab rails. I assume only 2 of these holes are used one each side as you see here. (dome head nut on inside of fender)




Also there are two threaded holes in the frame under seat, are these holes used for anything? I stuck a bolt in one for the photo.



Offline pikipiki

  • Gaggle Mentor
  • ****
  • Posts: 476
  • Location: UK
Re: V7 classic question
« Reply #1 on: October 11, 2015, 03:10:46 PM »
5 small bolts one at the very back can be seen in picture 1,
2 big bolt in picture 1 but possibility to fit 2 more.
2 small bolts can be seen in pic 2 and 2 more lower down.

So 7 bolts

Do you have the extra bolt holes unused?

 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here