A new PF09 supplier

[flangeman_70]

Hi All,

A new PF09 is now available. I have just purchased one and it arrived today and looks to be a quality item. It even comes with data logging information to confirm how it passed quality assurance.
I will install tomorrow and report back on it's performance.




 
Here is the link on the bay of fleas with a description of how and why.
http://www.ebay.co.uk/itm/Throttle-Position-Censor-TPS-PF09-Ford-Cosworth-Fiat-Lancia-other-vehicles-/111773659604?hash=item1a063ab1d4:g:RX8AAOSwv0tVHwHv

Regards,

Adam

[LowRyter]

http://ca-cycleworks.com/

[KiwiKev]

Buggers should learn how to spell - lol

That would be a sensor , a censor is a slightly different beast.


Sent from my iPhone using Tapatalk

[pete roper]

If it's a censor though...Does that mean smoke comes out? Or is it directly connected to some higher being?

 

[KiwiKev]

If it's a censor though...Does that mean smoke comes out? Or is it directly connected to some higher being?

 

Not sure Pete, maybe he censors throttle position in case any restricted openings occur.


Sent from my iPhone using Tapatalk

[twowings]

An early PF09 prototype:

[flangeman_70]

Installed and working 
Tried with both WM16M and MyECU and it is perfect.

For information only.
I replaced it as the old unit was jumping around at idle but this may have been an adjustment issue.
Initial setup was good with the WM16M but when I put in the MyECU and wound the idle back to just over 1150 it was jumping from 0.069 to 0.169 resulting in a lumpy idle when at operating temps. So I adjusted it back to 0.058 and it is a rock solid idle and readout

Adam

[sib]

If it's a censor though...Does that mean smoke comes out? Or is it directly connected to some higher being?

 

Ahem, that would be a censer.

[KiwiKev]

Ahem, that would be a censer.

censer
[sen-ser]
noun
a container, usually covered, in which incense is burned, especially during religious services; thurible.

Ah ok, now I know what Pete was prattling on about[emoji16]


Sent from my iPhone using Tapatalk

[pauldaytona]

They sell a pf3c too, I have thought you need to huge sell numbers to make a production run profitable.

[Tusayan]

They sell a pf3c too, I have thought you need to huge sell numbers to make a production run profitable.

I would've thought so too, but a while back Chris at California Cycle Works (now oddly enough in Georgia, USA...) kept me on the phone for almost an hour talking about obscure Ducati parts and how he as an EE enjoys researching and sourcing them.  It might be a kind of hobby sideline to his business, from which we (and also a few Chinese) benefit.  I'm sure glad to see it happening, passion is what Italian bikes are all about.