On my recent tour to Nova Scotia, I had to make a few suspension adjustments. The Front forks were so stiff and hard in the bumps that it was knocking me off line in the turns. I know the Stock 8V suspension is better than the 4V, but is still nothing special. It works mostly for me.
The problem is I wanted to back off the spring preload a bit, and couldnt remember where I was in the setting so I decided to back all the way out then go in again. Problem was it just kept spinning. Is this a normal condition and the only 'stop' is all the way clockwise (full preload)
I dont really want to drop $600 on fork innards, so I'm hoping I can pull the cap and fix the adjuster?
