New Moto Guzzi Door Mats Available Now
blackcat - You could have them nikasil plated to the dimensions of your pistons. I guess my estimation of the bike, and LM series 1, was off a bit. I had no idea they were worth that much.
I got this "box" of Lemans for $3,500, which included nos switches,vapor blasting of engine,etc., a nos seat, barells machined and one over pistons,rings and some other stuff that I can't remember right now. Now I'm here:I haven't started on the engine or transmission but everything has been vapor blasted clean except for the carbs which have to be done too. Little by little it will get done, but with work this may take awhile. One problem is the barell, it's been (both) bored but due to a loose pin it was scored at the bottom of the skirt. In the end I will probably send it out and have it fixed instead of putting it together and seeing what the compression says, but that is down the line.
Charlie, the early ones did not have a ribbed rectangular plate as a shoe kick. I have the stock ones from my CX but I'm reluctant to grind off the mounting bosses to make it work, but that is another option. I might be interested in purchasing yours.
Boot protectors are flat rectangles, later ones had vertical ribs embossed on the surface
I've found the bigger problem after I get is is forgetting where I put it........
Why does that ice blue look O K on a SP but great on a Lemans?
Same reason a slinky black dress looks great on Heidi Klum but not so much on Rosie O'Donell