96 1100 sport speedometer

[TFinch1990]

So it seems I have made my first mistake owning the 1100 sport I broke the speedometer cable I thought that it was just the inner cable but it’s the out side also it got pinched in between the air box and the frame I thought that’s how it routed I was wrong I ordered what I thought was the correct cable from MG cycle when I received it I found that it was too short about 10inch shorter then the one I took off the bike MG is trying to help me but it seems I’m confusing them can any one tell me what the correct cable is or at least the length of it and does any one have any insight or pics of the correct way to rout it

[Antietam Classic Cycle]

Is this the cable you got from MG Cycle?:
http://www.mgcycle.com/index.php?main_page=product_info&cPath=135_138&products_id=63

[TFinch1990]

No that’s not it the one I ordered only cost like $15 is the one you send the leank too supposed to be the correct one if so I screwed up

[Antietam Classic Cycle]

No that’s not it the one I ordered only cost like $15 is the one you send the leank too supposed to be the correct one if so I screwed up

The one I linked to is the one Stein-Dinse lists as the correct cable, part number 01760400. It's 1400 mm/55 1/8" long.

[Devildog]

The one I linked to is the one Stein-Dinse lists as the correct cable, part number 01760400. It's 1400 mm/55 1/8" long.

Thanks Charlie. I need one too. Same scenario.

[TFinch1990]

Can any one tell me the correct way to route the cable so that I do not break it agine I have the stock air box on my bike if that makes any difference

[Chuck in Indiana]

Can any one tell me the correct way to route the cable so that I do not break it agine I have the stock air box on my bike if that makes any difference

Well, I Shirley  can't except to avoid any sharp bends.