removed the dyna sensor plate and rotor, checked my flywheel marks and reinstalled dyna bits and timed the lemans. think I installed the distributor incorrectly the first time as the notch in the center shaft wasn't where it was supposed to be. instead of the notch at 11:00 seated it was 5:00 seated while the right cylinder was tdc. seems to be much smoother now. I can actually see behind me now with my mirrors. going to go back and sync the carbs again. also retorqued the heads and adjusted the valves which had tightened up a bit. bike now has 450 mile since the rebuild. almost time for the oil change. now that I forgot to order an oil filter when I just placed a big order at mgcycles this week. is there a cross reference for the oil filter or do need to get it from one of our guys?
thx
allen
