California III Front Right Brake Hose Advice

[jguzzi]

I am in need of a 1990 California III front right brake hose with fittings for the standard F08 Brembo caliper.  The fittings are M10 x 1.0 pitch.  Or alternative advice welcome on solutions.  Local brake shops do not have the right fittings to fit the flare in the Brembo F08.  pic attached....the hose is about 42 inches long.

[guzzisteve]

Have you tried MG Cycle? I'm doing brake work now on my EV, got fittings from Summit Racing right down the road 30mi.

[jguzzi]

They are not in stock at MG Cycle or at Harpers unfortunately.

[Vagrant]

https://spieglerusa.com/

there are a couple of others too that will do custom. I'd get the one with the swivel fitting on one end. It makes life easier.

[berniebee]

The pic doesn't enlarge when I click on it, so it's not very useful.

Have you tried a custom brake line maker on-line? There are many. If you have the original line, you can simply ship it to them to copy.
I have Russell brake lines on my SP1000 which has F08's on the front. They were on it when I bought the bike, so I don't have any other info about them.

[Antietam Classic Cycle]

You don't have to stick with the original configuration. Simple enough to use Magnum BYO fittings and hose to make another.
https://www.mgcycle.com/index.php?main_page=index&cPath=110_114

[Antietam Classic Cycle]

Teo Lamer's has 2 in stock: https://shop.tlm.nl/en/brake-hose-front-brake-cal3-296571500000-moto-guzzi

[guzzisteve]

I like the Frentubo lines that MG used to sell, they had nothing for an EV. I called Bellissimoto in Vegas area, they are a Frentubo dealer. Have to specify that year is a Classic model to get what you need.
Now I need the hard pipe cause things didn't come apart after 23yrs.

https://www.bellissimoto.com/

[jguzzi]

Thanks all.  I contacted several US places as suggested.  Ended up using Charlie's suggestion for Teo Lamar because they are direct fit.  I could tell by looking at the fittings.  Was about the same price for the hose and shipping as Spiegler wanted for just the hose with fittings I was not quite confident about.  Thanks again.

[John A]

Dennis Kirk has that stuff and ships quickly so that’s another option https://www.denniskirk.com/search/Brake+line.q

[guzziart]

https://spieglerusa.com/

there are a couple of others too that will do custom. I'd get the one with the swivel fitting on one end. It makes life easier.

 

[larrys]

I had a local hydraulic shop make a right front brake line for my Cal recently. They had the correct fittings and the price was $30. I was given the option of four different colors of braided stainless line but I went with the black neoprene to keep it looking stock.
Larry

[Two Checks]

Spiegler made all the hoses for my 90 Cal III Touring directly form my old lines. They fit perfectly ald look good.
(Thanks again, Curtis)

[jguzzi]

Thanks guys....local shops did not have the fittings.  Spiegler could do it but I went with Teo Lamer who had an new one for about the same price including shipping.  All should be good now.