Aux/fog lights on tonti

[yackee]

Moto, on this board, very kindly gave me a pair of nice LED auxiliary/fog lights for my T3. He has similar lights mounted on his T3, under the headlight with a clever homemade bracket.

I was hoping that others on the board might be able to share their strategies for mounting aux lights on their Tonti-frame bikes so that I can think through the possibilities. I have the "civilian" crash bars, but they don't seem adequate, either because of angle/height that the lights would be mounted at, or because they would be close to the exhaust port, which I don't want to obstruct. And I have the "tall" police-style windscreen on, as sold my mgcycle. my turn signals are mounted on a bar, also sold by mgcycle, on the bottom fork cross-brace.

Thoughts appreciated. And a shout out to Moto for his generosity and deep experience with these old bikes.

[StuCorpe]

I used a pair of clamps from Harpers that they use to mound their fairing.  A long threaded rod filled up with stainless steel nuts to make it larger diameter (probably not necessary).  It looks like this.

[guzzisteve]

On the bottom triple tree in front is where the brake fitting for front brake is, this is perfect place to mount bracket w/brake piece on top.

[kingoffleece]

I'd be concerned that lights mounted too close to the turn indicators.  Could wash out the signal to approaching drivers.

[StuCorpe]

King of Fleece- Doesn't seem to.  I have them connected like the aux driving lights on autos are supposed to be.  They are only on while driving on high beam headlight, whenever I go to low beam they go off.  That way no one coming toward me is not blinded like so many of todays super bright LED headlights do.