Author Topic: Breva 750 crash bar  (Read 4226 times)

Offline BMCMOTO

  • Gaggle Hero
  • *****
  • *
  • Posts: 947
  • Location: East Lansing, MI
Breva 750 crash bar
« on: February 14, 2026, 03:40:00 PM »
Looking for a crash bar like this. Does anyone know the maker? I've checked the usual sources Hepco Becker, Givi etc. but haven't found them.





Any info would be appreciated!

Brian
1989 MILLE GT 
2006 BREVA 750
2004 BREVA 750     
1975 CONVERT

Online Dirk_S

  • www.dirkshearer.com
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2454
  • Doodler of doodles
    • www.DirkShearer.com
  • Location: Portland, Maine, U.S.
Re: Breva 750 crash bar
« Reply #1 on: February 14, 2026, 05:34:37 PM »
Those are from Stucchi. They still make the style of engine guard for the newer hemi heads. I believe they’ll fit on an older Heron head small block, but they’re not as close to the heads as they once were (the hemi heads are bigger)
Current: '18 Guzzi V7 III Rough, '17 Guzzi V9 Bobber, ‘78 BMW R80/7, 1986 Sputnik sidecar

Previous: '16 Guzzi V7 II Stone, ‘15 Ural Gear Up, '11 Suzuki TU250X, ‘86 Guzzi V65 Lario, '78/‘80 Honda CX500, '77 Kawasaki KZ400 Special

Offline 73 sport

  • Gaggle Mentor
  • ****
  • *
  • *
  • Posts: 254
  • Location: EDGEWATER, MD.
Re: Breva 750 crash bar
« Reply #2 on: February 14, 2026, 06:18:54 PM »
  Those crash bars, or similar, are available at Harpers.

Offline BMCMOTO

  • Gaggle Hero
  • *****
  • *
  • Posts: 947
  • Location: East Lansing, MI
Re: Breva 750 crash bar
« Reply #3 on: February 14, 2026, 07:28:30 PM »
Thanks Dirk!

Brian
1989 MILLE GT 
2006 BREVA 750
2004 BREVA 750     
1975 CONVERT

 

Check out the official Wildguzzi Amazon Affiliate Storefront.
Proceeds go back into the forum.
If you need to buy it anyway, use the affiliate link to help the forum.
Advertise Here