« previous next »
Pages: [1]   Go Down

Author Topic: 1972 Eldorado crankshaft specifications  (Read 1365 times)

Offline BSABEN

  • Gosling
  • ***
  • Posts: 160
1972 Eldorado crankshaft specifications
« on: June 18, 2019, 07:39:11 AM »
I have the crankshaft out of my El Dorado and am taking measurements to determine if a regrind is required.

Does anyone have the specifications/clearances (or can point me in the right direction) for the big end journals, and the crank journals that fit the front and rear of the crankcase?
Logged

Online TOMB

  • Gaggle Hero
  • *****
  • Posts: 1519
  • Location: Newington Ct. 06111
Re: 1972 Eldorado crankshaft specifications
« Reply #1 on: June 18, 2019, 07:54:40 AM »
I don't have the exact measurements but as a side note,

Don't assume it is the standard  measurement .

My 72 Eldo came from the factory with a 1st undersize crankshaft.

TOMB
Logged
TOMB

CENTRAL CONNECTICUT
1972 Eldorado new to me so "0" miles so far
1972 AMBASSADOR 169000 MILES
1978 G5 170000 MILES
1973 V7 SPORT 25000 MILES
1973 ELDORADO 300000+ MILES
1980 CX100 50 MILES
1976 CONVERT-62000 MILES AND BUILDING
1976 HONDA CB400F 27 MILES AND BUILDING SOLD

MGNOC # 2723

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • Posts: 15085
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: 1972 Eldorado crankshaft specifications
« Reply #2 on: June 18, 2019, 08:30:56 AM »








Logged
Charlie

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • Posts: 15085
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: 1972 Eldorado crankshaft specifications
« Reply #3 on: June 18, 2019, 08:32:53 AM »
I do use the radius specs. from the V7 Sport manual when having the crank reground.


Logged
Charlie

Online pehayes

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4799
    • Falcone Touring
Re: 1972 Eldorado crankshaft specifications
« Reply #4 on: June 18, 2019, 11:22:18 AM »
You need to familiarize yourself with this resource:

http://www.thisoldtractor.com/moto_guzzi_loopframe.html

Patrick Hayes
Fremont CA
Logged

Offline geodoc

  • Gaggle Mentor
  • ****
  • Posts: 322
Re: 1972 Eldorado crankshaft specifications
« Reply #5 on: June 18, 2019, 01:21:49 PM »





.
Logged
20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here
Pages: [1]   Go Up
« previous next »
 


NEW WILDGUZZI PRODUCT - Moto Guzzi Door Mat
Receive donation credit with door mat purchase!
Advertise Here