Griso clutch master cylinder push rod

[Trogladyte]

Is that what this thing is called? It's the adjustable pin in the clutch lever that actually operates the hydraulics. Mine was coming loose, and I was getting clutch drag and trouble getting neutral at a standstill. So I took it all apart, adjusted it and re-tightened the grub screw to lock it. It's all working - for now. But the threads on the pin are very worn. and the post in the lever that the pin screws into is aso very worn indeed. There's a worrying amount of play - it's flopping about like a sausage in the Mersey Tunnel. I've greased it up, which should slow the wear, but I would really like a new one.

Has anyone got a part number, or any other inspirational ideas to identify and locate this thing, which appears to be made from 100% unobtanium. Can't see it on the Fowlers microfiche. it must be a Brembo part, right? I suspect it's used on a whole range of European bikes. But what is it, and where can I get one? I'd rather not buuy a whole lever, as I have a couple of good spares. One has a push-rod, but someone has lost the grub screw, and used epoxy to keep it is place. Yawn.

[guzzisteve]

They come with epoxy on the grub screw, new on bike. Others have done this, I did a Griso once BUT I had the parts, don't know where boss got them.
Try a search

[RinkRat II]

  Looks like the lever assy is available... 981046 Silver 114.00 ...AP8118659  Gold...112.00  Cadre cycle shows the breakdown in their parts Fiche

     https://cadrecycle.com/

      Paul B

[Trogladyte]

  Looks like the lever assy is available... 981046 Silver 114.00 ...AP8118659  Gold...112.00  Cadre cycle shows the breakdown in their parts Fiche

     https://cadrecycle.com/

      Paul B

Thats the same diagram as Fowlers use. The pin isn't shown, so difficult to see if it is included with the lever assembly. Here's the part.

[RinkRat II]

       As you say, it doesn't show it and you may have to search Brembo's site to find it. Know a good machinist? Plan B.

       Paul B

[Moto]

Check eBay for item number 274166448077, clutch lever pressure pin griso.

I just bought one from the same seller.

EDIT: The item is supplied with the parts shown in the photo above, for $22 plus $6 shipping from Germany. It may have taken a couple of weeks to arrive. I wasn't in a hurry to get it, since I bought it to have as a spare.

Moto

[Trogladyte]

Check eBay for item number 274166448077, clutch lever pressure pin griso.

I just bought one from the same seller.

EDIT: The item is supplied with the parts shown in the photo above, for $22 plus $6 shipping from Germany. It may have taken a couple of weeks to arrive. I wasn't in a hurry to get it, since I bought it to have as a spare.

Moto

Thanks. I just bought the last one they had in stock. It feels like a lot of £$£$ for a tiny little part, which is hardly precision engineering. But it is critical, and I'm glad to be getting a new one!

[Charles]

Thanks. I just bought the last one they had in stock. It feels like a lot of £$£$ for a tiny little part, which is hardly precision engineering. But it is critical, and I'm glad to be getting a new one!

I know this thread is a bit old but can anyone provide info for a supplier (website) of this pin/plunger assembly. Trying to find the same. No luck on ebay.
Thanks.

[gpranzo]

Gotham Cycles has them for about $40. Expensive but well made.
Moto Guzzi Griso 1200 Norge Breva Brembo Clutch Lever Pushrod Push Rod Paddle. These  will work  for Griso and Stelvio.

[Antietam Classic Cycle]

Gotham Cycles has them for about $40. Expensive but well made.
Moto Guzzi Griso 1200 Norge Breva Brembo Clutch Lever Pushrod Push Rod Paddle. These  will work  for Griso and Stelvio.

Linky: https://www.gothamcycles.com/Clutch/ducati--aprilia--moto-guzzi-brembo-clutch-lever-pushrod-and-barrel-with-paddle.html

[Lee Bruns]

Yep. I recently made one of those on the lathe for a local fellow.  Silly little pin.

[kidsmoke]

Additional link. I took delivery just yesterday.

https://www.wemoto.com/parts/aa0557