Author Topic: Risers  (Read 1197 times)

Online Moparnut72

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2390
  • Location: Quincy California
Risers
« on: March 18, 2023, 10:28:08 AM »
It seems when I start riding again in earnest each spring the bike doesn't fit me as well as I remember. I am going on my 3rd year with my V7lll Special. This year is the same as last year, "this bike could use a set of 1" risers with some setback." So saying that, I have a question, rather than tearing the bike apart to check I thought I would ask the experts here. I did a search and didn't find anything definitive. Will a set of 1" risers with some adjustable setback work with the existing clutch cable and brake line?
kk
Mopar or Nocar
2023 V100 Marina
2019 V7lll Special
MGNOC #24053
Amiga computer shop owner: "Americans are great consumers but terrible shoppers".

Offline Dirk_S

  • www.dirkshearer.com
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 1651
  • Doodler of doodles
    • www.DirkShearer.com
  • Location: Portland, Maine, U.S.
Re: Risers
« Reply #1 on: March 18, 2023, 10:54:27 AM »
Read someone on the V7 FB page said their pullback risers didn’t fit—cables wouldn’t reach. Not sure if the V7 II and III cables are the same, but I’ve successfully used both pivoting risers from APE Racing and currently using the SW Motech 30mm risers. The SW Motech risers bring my posture back to a more neutral stance, whereas before I leaned forward too much for long term comfort.

Sometimes I find it odd that Guzzi slapped that big tank onto the old small block frame and pulled the seat back compared to the older small block models. Makes the V7 a hybrid sport-neutral-cruiser stance.
« Last Edit: March 18, 2023, 08:29:43 PM by Dirk_S »
Current: '18 Guzzi V7 III Rough, ‘86 Guzzi V65 Lario, '78 BMW R80/7, 1986 Sputnik sidecar

Previous: '16 Guzzi V7 II Stone, ‘15 Ural Gear Up, '11 Suzuki TU250X, '78 & ‘80 Honda CX500, '77 Kawasaki KZ400 Special

Online RinkRat II

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2207
  • Lake Powell AZ
Re: Risers
« Reply #2 on: March 18, 2023, 01:48:44 PM »

   Thinking out loud here, don't know if it'll work for you, but I used a set of risers off a honda (ebay $20.00)   for my Sport and they work a treat.
Small setback and higher by an inch. No other changes. Food for thought.



    Paul B :boozing:
A Miller in the hand is worth two in the fridge.

Online Moparnut72

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2390
  • Location: Quincy California
Re: Risers
« Reply #3 on: March 18, 2023, 03:11:42 PM »
I've been looking at the Rox pivot risers. Good idea on ebay. I usually check ebay for stuff. Can usually find something.
kk
Mopar or Nocar
2023 V100 Marina
2019 V7lll Special
MGNOC #24053
Amiga computer shop owner: "Americans are great consumers but terrible shoppers".

Wildguzzi.com

Re: Risers
« Reply #3 on: March 18, 2023, 03:11:42 PM »

Online frozengoose

  • To eaches his onus...
  • Gosling
  • ***
  • Posts: 339
    • smiles from nowhere
  • Location: Just a little ways past Fairbanks, Alaska on the locally world famous Chena Hot Springs Road
Re: Risers
« Reply #4 on: March 18, 2023, 03:20:54 PM »
It seems when I start riding again in earnest each spring the bike doesn't fit me as well as I remember. I am going on my 3rd year with my V7lll Special. This year is the same as last year, "this bike could use a set of 1" risers with some setback." So saying that, I have a question, rather than tearing the bike apart to check I thought I would ask the experts here. I did a search and didn't find anything definitive. Will a set of 1" risers with some adjustable setback work with the existing clutch cable and brake line?
kk

I put these handlebars from MG on my v65 to get a more upright seating position, takes the pressure off my wrist/elbow arthritis/tendonitis. There's probably other styles that'd work too. Might be cheaper than risers. The existing cables worked too.

https://www.mgcycle.com/index.php?main_page=product_info&cPath=52&products_id=4781
Big Jon

Two old Guzzi's (V65 & T), 250E CZ, and 6 happy huskies.

Well, I've got a baby, she's a bad motorcycle
Brrooom-pa-pa-pa, pa-pa-pa-pa-paw
When we ride together, all through the night
She's got a real wild machine and it's out of sight
She goes brrooom-pa-pa-pa, paw-paw, motorcycle
Jerry Zee

Online xackley

  • Gosling
  • ***
  • Posts: 231
  • Location: finger lakes in new york
Re: Risers
« Reply #5 on: March 18, 2023, 05:17:18 PM »
These 30mm risers will work. They do provide a small improvement
https://www.amazon.com/gp/product/B096FQNFHB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Don
1958 R69 BMW, 1972 R75/5, 1980 yamaha XS650, 1982 GL1100, 2003 EV, 2007 Triumph America and 2017 V7!!!
All on the road, going nowhere in particular.

Online Tom H

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 3468
  • Location: So. Cal.
Re: Risers
« Reply #6 on: March 18, 2023, 08:01:14 PM »
For the risers. I would suggest Rox or one of the knock offs.

Your real question was cable length. That I do not know. I would think that with the 1" your looking for, stock cables should work. You may need to re-route them? I'm sure you know, if you buy a Rox type 1", it's just 1" up or any angle to pointed back from the stock bar clamp. Back might be easier than up for the cables.

Hope this helps,
Tom
2004 Cali EV Touring
1972 Eldo
1970 Ambo V1000
1973 R75/5 SWB with Toaster
2007 HD Street Bob
1953 Triumph 6T (one day it will be on the road!)

Online twowheeladdict

  • Gaggle Hero
  • *****
  • Posts: 6358
Re: Risers
« Reply #7 on: March 19, 2023, 10:32:06 AM »
It seems when I start riding again in earnest each spring the bike doesn't fit me as well as I remember. I am going on my 3rd year with my V7lll Special. This year is the same as last year, "this bike could use a set of 1" risers with some setback." So saying that, I have a question, rather than tearing the bike apart to check I thought I would ask the experts here. I did a search and didn't find anything definitive. Will a set of 1" risers with some adjustable setback work with the existing clutch cable and brake line?
kk

If you are very happy with the seat and footpeg position, this is my suggestion.  Put the bike upright, (chock, center stand, friend supporting it) sit on the bike with both feet on the pegs in the riding position.  Close your eyes and put your hands where you want the grips to be while another friend snaps a photo or have the video camera on a tripod.  Now you know your ideal set up.  Build some bats with you pipe Bender or use PVC to get the hand position right.  Then buy bars, cables, hoses, etc, and have the bike you truly will enjoy. 

I went the opposite with rearsets and LSL Clubman bars to emulate the V7 racer riding position.  I use my laverda adjustable bars to find the desired position.





And then found bars that came the closest. 
2022 Moto Guzzi V85TT Guardia D'onore
2018 V7 III Carbon Dark #0009 of 1921
2018 Road Glide Special
2021 Kawasaki KLX300SM
2017 Suzuki Van Van 200
2015 Yamaha SR400
2009 Harley Davidson Softail Custom

Offline mechanicsavant

  • Gaggle Mentor
  • ****
  • *
  • *
  • *
  • Posts: 611
  • Location: wales ma.
Re: Risers
« Reply #8 on: March 20, 2023, 07:03:22 AM »
I recently replaced the clutch cable on my V7II . Very tight fit . If the part # is the same as a MkIII cable It’ll be fiddly at best .

Offline drdwb

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 1273
    • backfeelsgreat.com
Re: Risers
« Reply #9 on: March 20, 2023, 10:47:08 AM »

Here’s a site that allows you to see how you can modify a lot of bikes to get to the desired riding posture. Hope it works for your particular bike.

http://cycle-ergo.com/
07 Norge, 05 Baby Breva, 04 Stone  Touring , 03 EV, 82 650 Maxim 79 XS750 Special 78XS1100 Teraplane side car

Online John A

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 5077
  • No way to slow down...
  • Location: Hager city ,western WI
Re: Risers
« Reply #10 on: March 22, 2023, 09:36:33 AM »
Here’s a site that allows you to see how you can modify a lot of bikes to get to the desired riding posture. Hope it works for your particular bike.

http://cycle-ergo.com/





That’s fun to play with!
John
MGNOC L-471
It is easier to fool people than it is to convince them that they have been fooled-Mark Twain
99 Bassa, sidecar
02 Stone
84 V65C
15 F3S Spyder

Offline Bulldog9

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2817
  • Location: United States
Re: Risers
« Reply #11 on: March 24, 2023, 03:40:30 AM »
I have 3/4" SWMotec risers on the Stornello, I don't remember much problem, but faintly remember re rerouting the clutch cable. But that was 4-5 years ago....
MGNOC#23231
The Living: 1976 Convert, 2004 Breva 750, 2007 GRiSO, 2008 1200 Sport, 2016 Stornello #742,
The Departed: 2017 MGX, 2014 Norge GT, 
In Stasis: 1978 XS750, XS1100SF

Online bad Chad

  • Gaggle Hero
  • *****
  • *
  • Posts: 9633
  • Location: Central Il
Re: Risers
« Reply #12 on: March 24, 2023, 10:51:59 AM »
But beware, cycle-ergo is not always accurate.
2007 Breva 1100  Red Arrow (and faster than yours!)
2016 CSC 250TT Zongshen
2017 V9 Roamer

Online xackley

  • Gosling
  • ***
  • Posts: 231
  • Location: finger lakes in new york
Re: Risers
« Reply #13 on: March 24, 2023, 02:56:09 PM »
These 30mm risers will work. They do provide a small improvement
https://www.amazon.com/gp/product/B096FQNFHB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Don

Just installed these. They are the maximum without rerouting cables and wires. There is a very little slack left but doesn't appear to cause any issues.
https://www.amazon.com/dp/B091F87YTH?ref=ppx_yo2ov_dt_b_product_details&th=1

Edit: Image in case link disappears in future


« Last Edit: March 25, 2023, 01:09:03 PM by xackley »
1958 R69 BMW, 1972 R75/5, 1980 yamaha XS650, 1982 GL1100, 2003 EV, 2007 Triumph America and 2017 V7!!!
All on the road, going nowhere in particular.

Online Moparnut72

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2390
  • Location: Quincy California
Re: Risers
« Reply #14 on: March 25, 2023, 11:47:34 AM »
Thanks guys for all the comments. I think I will give it a try. Not much to lose if it doesn't work out.
kk
Mopar or Nocar
2023 V100 Marina
2019 V7lll Special
MGNOC #24053
Amiga computer shop owner: "Americans are great consumers but terrible shoppers".


NEW WILDGUZZI PRODUCT - Moto Guzzi Door Mat
Receive donation credit with door mat purchase!
Advertise Here
 


NEW WILDGUZZI PRODUCT - Moto Guzzi Door Mat
Receive donation credit with door mat purchase!
Advertise Here