T3 bs Convert seat

[fotoguzzi]

Are the stock T3 and Convert/G5 seats interchangeable? I believe they are but looking for confirmation.

[jhem68]

I have swapped my Convert seat between my SP and my 850T without any real issues. A little snug at the grab rail when in the open position on the T but not a real problem, so I would suspect it would be doable.

[Tkelly]

I did the same thing as the T seat was terrible.

[moto]

Yes.

But if you will brook a little free advice, the 
Convert seat changes the aesthetics of a T/T3 quite a bit, to my eye.

I ran a leather covered original T3 seat for many years, with a gel insert. Not too uncomfortable. Now I have one of the repro T3 seats sold by MG Cycle, which is very comfortable. Send me a PM if you might be interested in the former.

[guzzisteve]

Yes, they interchange on different models but there may be snugness by tank or in back (like mentioned) foam to grab rail.
Different models for foam & same basic pan.

[Tom]

Good to hear you got an answer.  I didn't want to go into the garage and stare at both of the bikes.