Norge Brake wiring connection

[SemperVee]

 I believe I am holding the rear brake connection in my hand and was thinking of splicing into one of these wires for my LED AUX Hyper-lite add.  Can anyone share what wire I should spline into or more than one wire??

[Paul_Tim]

If it's the same as the Stelvio Blue is Ground, Yellow/Green is switched 12V from the brake switches and Yellow/Grey is 12V for the tail light. Quick check with a meter / bulb should confirm it.

[SemperVee]

 Thanks Paul.   I think I also need to install a diode or two? - to get it to flash? Do I use one or two diodes as there are two lines separate from ground. *Positaps thanks! Here is what it looks like attached now. Lighting up but not flashing as it should. I believe I need to add a Diode, but to which or both wires is my understanding?

[Paul_Tim]

Can't help you on the diodes as I don't know the lights/system in question.

Hopefully an adult will be along soon to help you out.

[Pescatore]

I would try their troubleshooting chart.
https://hyperlites.com/support/
The module should do the flashing without any external parts.

[SemperVee]

I would try their troubleshooting chart.
https://hyperlites.com/support/
The module should do the flashing without any external parts.

Thanks for bringing that up, It's a great idea & I have done that>>  Also sent email questions to the company.  Thus far no response from Hyperlites.. 

[SemperVee]

UPDATE*  Once I installed a Diode and redid the permanant  wire connections with Posi Taps all is working as it should!    Gotta love a happy ending.