Author Topic: 2014 Stelvio exploratory procedure  (Read 558 times)

Online Tkelly

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 1185
2014 Stelvio exploratory procedure
« on: August 29, 2024, 03:36:21 PM »
My broken down bike has been retrieved from Utah and we are about to take the rear end apart to determine why the power is not reaching the rear wheel.My hope is that it is a ujoint failure,not the clutch.Any tips on how to proceed,and pitfalls to avoid would be welcome.

Offline guzzisteve

  • Gaggle Hero
  • *****
  • *
  • Posts: 11684
  • "Just Ride It"
Re: 2014 Stelvio exploratory procedure
« Reply #1 on: August 29, 2024, 07:00:08 PM »
Undo rear brake & remove wheel, disconnect torque bar to rear drive, 4 bolts to remove, Remove the speed sensor too, NEXT is swing arm.
There was a CARC on the Ghetto for $1200, might be gone now.  Good Luck Tom

Here's kind of a guide w/pics

https://guzzitek.org/gb/ma_us_uk/1200/Stelvio1200_NTX_ABS_2010_Atelier2013(GB).pdf
« Last Edit: August 29, 2024, 08:40:10 PM by guzzisteve »
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here
 

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here