Reading the DSB Codes

[SemperVee]

 Finally got the dreaded RED Alarm triangle on start, turned engine off and restarted. Gone.  Found my way into the Diagnosis Modes and Engine codes but nowhere how to recognize them?  manual is of little help. Should be obvious?   I uploaded the attached pics.  What does the MODE A or M stand for?   Is it O or X I am looking for in the Diagnosis?
Need help for what I am looking for, what means throwing a code ?  Does not seem to be oil sensor. both match.  Restart and it's gone but returns later.
  See pics.   Thanks

[guzzisteve]

I explained it all over on GT forum. It is in the owners manual

[SemperVee]

 Thanks Steve,
    I have both the owners manual and the Service station manual.  Don't know where I am missing where it explains it besides the one RED triangle alarm.  Been thru them both several times.

[guzzisteve]

It doesn't say anything on how to fix red triangle Only to say go to dealer.   

[GuzziOrDeath]

A = Active
M = Memorised (no longer active)


The X indicates which  mode.

[SemperVee]

 Still getting the RED triangle of death and tried "Huzo" method of turning off key while at speed and presto chango it worked!   *Well until I went to start again.  it still comes and goes..   

Went and got battery load tested, thats fine -  thinking it might be that,  as I still cannot DELETE the dash board errors in memory no matter what I do  whether disconnecting the battery or how many pushes of the YES delete and holding my tongue they simply won't disappear out of MEMORY!   

The oil sensor 07 dash board error comes and goes at will.   My understanding is I will see the sensor on the left hand side under the tank when I pull it off and look down on front of part of the air box?

[GuzziOrDeath]

   
Can't delete them via GuzziDiag or Dash service menu?


 

Yeah, it's on the left next to the alternator.