Stelvio 1200 NTX ECU map needed

[whitewolf]

Could someone please share a 2014 Stelvio 1200 NTX 4V ECU map for a 5AM ECU? I can share mine in return, idle is not working well but you get very nice backfires on deceleration :)

I have the idle issue described on this thread here https://wildguzzi.com/forum/index.php?topic=123163.msg1902114#msg1902114
Meanwhile I got idle choking when the engine is first started and cold, so usually I need to start the motorcycle several times until it runs. Checking older threads and online data I've found many people reporting this issue resolved after writing a new map.

[Antietam Classic Cycle]

http://www.griso.org/

[Tom H]

You might look up about cleaning your stepper motor. It can cause idle issues.

Tom

[whitewolf]

http://www.griso.org/

Thanks, I know this site, but if I'm going to pay $100 I'll go to a Guzzi shop, buying an ECU map from over there may not fix my problem and I'm not looking for tuning the bike, I'm hoping someone with a similar Stelvio can just pull out the map and share it

You might look up about cleaning your stepper motor. It can cause idle issues.

Tom

that's something I didn't tried, thank you, I'll check the stepper motor

[Tom H]

Beetle maps fix some of the issues with stock Guzzi maps.

You can cycle the stepper just by turning on the key for a moment and then turning it off. You will hear it moving.

Tom