My 'new' Stornello

[egschade]

Just purchased this basically new Stornello. 94 miles on the odometer, molding nibs still on the tires, untouched except for a new battery. The PO is a collector with several ultra low mileage toys in his collection including a Ford GT, 80's vintage Silverado with a 454 and original tires, and a handful of International Scouts.

First order of business is changing all the fluids and replacing the in-tank fuel filter. Next is tires despite that the OEMs are basically new and actually feel somewhat pliable. Will probably go with Bridgestone AX41S but still thinking about others. Anyone run the Kenda K761 tires?

Other minor, reversible mods I'll make are adding a left side saddle bag, skid plate and better horn. I already put my tail pack on the seat, have a magnetic tank bag and ran the wiring for a USB port and GPS. Will also try a set of Hagon shocks I'm buying from Bulldog9.

[kidsmoke]

Congrats, I really like the Stornello.

[Dirk_S]

Congrats! Must feel weird to have to break in a motor that’s a decade old.

[Brand X]

I ran the stock rear, and a Pirelli MT-60 RS on the front.. Super matches to each other..Both radials .Just put a new set on a Ducati SC 1100 the other day..Same rubber compound as the Sp V3 sport tires.. I bought a set of Shinko 705 for my current BMW X country and those are good also. I would of bought the Kenda 761 if they were in stock. Had good luck with the sport touring tires from them. I noticed the front Shinko has a bit or run out on it, but cannot feel anything from that..It's enough for me to buy something like the Kendra's next time for it..

Be sure to watch your clutch lever travel. Mine went back to the Handle bar right at 2000 miles. Went right to the max crank thrust clearance
at that time.. Mine is the only Stornello on the web that has that dreaded crank issue. Just be aware of the 2016 issues and get some miles
on it to see. i bought mine with 400 miles on it a few years ago.. 

[Kev m]

Be sure to watch your clutch lever travel. Mine went back to the Handle bar right at 2000 miles. Went right to the max crank thrust clearance
at that time.. Mine is the only Stornello on the web that has that dreaded crank issue. Just be aware of the 2016 issues and get some miles
on it to see. i bought mine with 400 miles on it a few years ago..

I warned him about yours before he pulled the trigger...

[guzzi ride]

Beautiful bike, it's the only small bore Guzzi that appeals to me.

[davethewelder]

A few years back I passed on a Stornello at a dealer, there are so cool lookin'.

[JJ]

Good for you and CONGRATS!!!   Always liked the look of this model Guzzi!

What's all this about..."the dreaded crank issue?" ?????

[Bulldog9]

I ran the stock rear, and a Pirelli MT-60 RS on the front.. Super matches to each other..Both radials .Just put a new set on a Ducati SC 1100 the other day..Same rubber compound as the Sp V3 sport tires.. I bought a set of Shinko 705 for my current BMW X country and those are good also. I would of bought the Kenda 761 if they were in stock. Had good luck with the sport touring tires from them. I noticed the front Shinko has a bit or run out on it, but cannot feel anything from that..It's enough for me to buy something like the Kendra's next time for it..

Be sure to watch your clutch lever travel. Mine went back to the Handle bar right at 2000 miles. Went right to the max crank thrust clearance
at that time.. Mine is the only Stornello on the web that has that dreaded crank issue. Just be aware of the 2016 issues and get some miles
on it to see. i bought mine with 400 miles on it a few years ago..

Thats the first Stornello I heard of having that issue.......... YUK  What is your Series #?

[Dirk_S]

Good for you and CONGRATS!!!   Always liked the look of this model Guzzi!

What's all this about..."the dreaded crank issue?" ?????

A number of V7 II bikes were gifted crankshafts whose clutch flange was milled too far back, causing excessive free play that somehow wasn’t caught. The excessive play eventually allowed the thrust bearing to pop out, which then allowed for even more excessive thrust, and the crankshaft would begin drilling its way through the aluminum engine case. Engines often failed within 10,000 miles, often much sooner. Quite a number of warranty replacements for a model year that lasted ~2 years.

[blu guzz]

I like the old dodge truck in the drive too.  Great looking bike.

[egschade]

<SNIP>

Be sure to watch your clutch lever travel. Mine went back to the Handle bar right at 2000 miles. Went right to the max crank thrust clearance
at that time.. Mine is the only Stornello on the web that has that dreaded crank issue. Just be aware of the 2016 issues and get some miles
on it to see. i bought mine with 400 miles on it a few years ago..

Did MG take care of the engine repair/replacement or were you stuck with the bill?

[egschade]

I warned him about yours before he pulled the trigger...

Yes you did - time will tell...

[Kev m]

Did MG take care of the engine repair/replacement or were you stuck with the bill?

IIRC he was stuck with the bill as they stopped handling replacements years before.

[Brand X]

I don't remember the # on mine seems like the low 200 range

Guzzi told me to take it to any dealer and they would look at it.. This was way out of Warranty The dealer had no clue how to really measure the crank thrust. It was 9 thou I found real nice e-bay 2016 engine with 4000 miles on it. Perfect thrust clearance. I traded the bike with the extra engine for a 2015  BMW F800r (Rotax)   So just run with it, and hope for the best. Put a Beetle map in it, and enjoy it  So now I have G650 X country, and it a pretty good SC type bike

I have no issue with Moto Guzzi, just the dealer in Portland.. I believe they would of did something if I pushed it..
I would own one again,(Moto Guzzi) but I would pay attention to known issues on this forum.

[TN Mark]

What a beauty, congratulations on your good fortune.

And, yes, it is odd breaking in a 10 year old motorcycle.