Author Topic: Breva sport clamps on standard Breva (Read 4893 times)

macaril@optusnet.com.au · « **on:** May 26, 2026, 01:58:18 AM »

Hi
Will the Sport clamps bolt straight onto a standard Breva, or do you need a new fork yoke also
Cheers
Rob

Jon8V · « **Reply #1 on:** May 26, 2026, 06:35:55 AM »

Top triple is the same. The Sport clamps mount in place of the riser bars used on the Breva.

Mayor_of_BBQ · « **Reply #2 on:** May 27, 2026, 04:45:38 PM »

straight swap if you can find 'em

I did this on my Breva 1100

I run a ProTaper bar 'KX High'

macaril@optusnet.com.au · « **Reply #3 on:** May 27, 2026, 06:04:39 PM »

Thanks Chad, appreciate that, I assume those bars don't have threads on the end for the bar end weights, or do they
Cheers
Rob

Jon8V · « **Reply #4 on:** May 27, 2026, 06:11:36 PM »

straight swap if you can find 'em

I did this on my Breva 1100

I run a ProTaper bar 'KX High'

Do the OEM wires and cables have enough slack or did you have to extend any?

macaril@optusnet.com.au · « **Reply #5 on:** May 27, 2026, 08:47:00 PM »

straight swap if you can find 'em

I did this on my Breva 1100

I run a ProTaper bar 'KX High'

One more question, did you have to drill the handlebars to fit the controls ? I have read elsewhere this is required
Cheers

Wildguzzi.com