Police Eldorado Ignition Switch Boot

[DaGootz]

He Gang, Slowly restoring my 1974 Eldorado Police and the ignition switch boot was missing when I bought it. I've been looking for one but no luck and I thought the one from McMaster Carr is way over price but I did find this inexpensive rubber boot from Amazon. Try this link- https://a.co/d/0b4dhhai if it doesn't work then copy and paste this description in your Amazon search bar- ( Set of 5 - Motorcycle Scooter Wire Harness Loom Connector Covers - Large - Fits Honda Kawasaki Yamaha Suzuki ) without the parentheses. This connector cover is the largest they sell at 38mm and will fit over the ignition switch which I believe is 41/42mm with no heat, just work it around with a small diameter pick/screwdriver and best if you take the switch out of the holder to maneuver the boot on. It fits great and looks good. Any questions let me now. Later!

[Tom H]

You might want to send this info to https://www.thisoldtractor.com/moto_guzzi_loopframe.html. Greg might be interested in putting this on his site.

Tom

[guzziart]

You might want to send this info to https://www.thisoldtractor.com/moto_guzzi_loopframe.html. Greg might be interested in putting this on his site.

Tom

Or maybe reach out to these folks.....https://www.ebay.com/str/csmrestorationparts     for soft rubber items.

[Antietam Classic Cycle]

I used a tractor shift lever boot. Have also use the McMaster-Carr boot as well.

[DaGootz]

You might want to send this info to https://www.thisoldtractor.com/moto_guzzi_loopframe.html. Greg might be interested in putting this on his site.

Tom

Message sent to Greg, thanks!