Visit the Wildguzzi Amazon Affiliate Store
From everything I’ve read, the OEM rear shocks were quite poor.
You've taken the time to adjust them, I assume? Check spring rates?It's a 2014. You have serviced the forks?Hamlin Cycles in Bethel, CT is a day drive for you. If you want the best guy on the east who's done dozens of those bikes and hundred of Guzzi bikes during his career you have that option.I drove a 14 model of that bike when it was new and it was very good out of the box.
The elephant in the room is a bike that's 12 years old.
Everything new. Rears are shot at 30K. If fronts have been done in past two years they will be as good as they can be as delivered. They can be much better.
It surprised me because all of the magazine reviews I read said it was great...
sk66, is your 2014 CA Tour still on the original demand sensor and are you using an AGM battery or a lithium LifeP04?I had my demand sensor replaced replaced last month at 2200 miles in my 2016 Eldorado. Doing so absolutely cured my random URGENT SERVICE fault warnings. Then I replaced my one year Yuasa YTX AGM battery with an Antigravity ATX-20-HD and that cemented the elimination of random fault codes.
The oem rear shocks on the Eldorado were made for looks, not performance. Other 1400 models most certainly received higher quality rear suspension. I 'think' all the forks were the same for all the models. What aftermarket shocks and fork internals did you go with?
+1 on the Matris. The later version of 1400 forks (Kaifa) is even more price point built than the earlier Sachs , but the Matris swap made a def. improvement. As for the shocks, the originals were predictably shot at 30+K miles. I used the Shock Factory units (without piggyback reservoirs ) and that also improved the ride a bunch.
Sadly Ncdan, I suspect your two Demand Sensor replacements may have been before the upgraded item came out. I had the same issues with my oem Demand Sensor that you and many others did. The day I replaced the original Demand Sensor with the new design, it's been 100% reliable. The bike is actually trust worthy now. I also greatly upgraded the battery going from a Yuasa YTX-20 AGM to the Antigravity ATX-20-HD Lithium LifeP04 as well. Two of the best upgrades my 1400 had left to do.I knew going into my 2016 Eldorado that a new Demand Sensor was very likely going to be needed. I learned all the bad behaviors from reading posts from you, Kevin and others. Therefore, I new what to do once I started seeing the eronious fault codes etc.