New Moto Guzzi Door Mats Available Now
Kelly,I have a Velorex 562 hack body that will get bolted on today. As for prepping the tub I have removed the seat, backrest and hardware to give Holly some room and keep her deeper in the car. I will get some indoor/outdoor carpet or a rubber mat to line the bottom. As for restraint I'm using 3/8" hardware to bolt the hack to the frame in 4 placed. Up front I'll use an eye bolt instead of a regular bolt. From there the plan is for Holly to wear a harness with a attachment point at her chest and only give her enough lead to stand up, lay down or sit. I want her to learn to stay totally in the car. The only other modifications I'd like to make are since the back rest in the tub is gone I loose some lockable storage. I might make a plate with a hinged lockable door in it and put it place of the backrest . I'd also like to add a tank to carry about 10 or 15 gallons of water. Not for drinking or washing but for ballast. Top off with water when the tub is empty. When hauling the pup open and drain out the ballast.