ev11 gearbox oil leak

[Wayne Orwig]

i think i found the grub screw on the swing are and it was wet

what do yohu use to remove\tighten it?

I usually just clean/degrease it, and wipe some sealant in the hole. That has always worked for ones I did.
Of course then you have to pick out the sealant if you ever want to get to the screw.

[oranges3]

is the grub/set screw something that can be removed, sealed up, and reinstalled without ripping the swingarm apart?

my tank seems to be off center  due to the fuel pressure reg hitting the wire harnesses routed on TOP of the frame.

is the routing correct?

[oranges3]

my fuel sending unit has fuel leaking from where the wire harness is routed into the sensor as it enters the tank... is there another fix other than replacing it?

i already have a manual fuel tap but that also has fuel leaking from the between the body and the knob... i am going to replace that piece.