anyone mount a Stebel airhorn on their Breva 1100?

[flower_king001]

Hi,

 Anyone mount a Stebel airhorn on their Breva 1100? If so some suggestions or photos is possible?

 Thanks

[ken farr]

I bought one a long time ago with the intention of doing just that.
Couldn't come up with a mounting solution that I liked.
I put Fiamm Freeway Blasters on the B1100, and the Stebel on the Dodge.

The Fiamms work very well.


kjf

[Robert]

Point it to the rear for some 'turbo' boost when needed.

[willowstreetguzziguy]

I mounted a 2-piece Denali SoundBomb air horn on my 1200 Sport this past March. I mounted both parts up front under the oil cooler. It was a tight fit but it looks and works great. Sound like a freight train.  Cost me $85.  I will take and post some pics tomorrow.

[willowstreetguzziguy]

I mounted a 2-piece Denali SoundBomb air horn on my 1200 Sport this past March. I mounted both parts up front under the oil cooler. It was a tight fit but it looks and works great. Sound like a freight train.  Cost me $85.  I will take and post some pics tomorrow.

Here's my mounting location. Perfect location  and THE ONLY SPOT I COULD FIND! br />

[flower_king001]

much thanks!

Here's my mounting location. Perfect location  and THE ONLY SPOT I COULD FIND! br />

[flower_king001]

Hi,

 I mounted my Stebel horn yesterday as shown making a bracket that connects to the oil cooler.

[flower_king001]

and here is an alternate location a friend of mine did making a bracket that goes to the crash bar bolt/mount.

[rdbandkab]

Your location much more sano. 
*As long as its clear of the fender during bottoming.

[flower_king001]

Your location much more sano. 
*As long as its clear of the fender during bottoming.

Yes...took a hard test run yesterday and all is good(so far)   

[rdbandkab]

Our first Breva had a two-tone set up by the cooler.   I know other drivers were wondering where the truck was that was honking at them..  Your set up should get some attention!

Our Capo is the opposite...   I swear the horn is actually just a tone to let you know you're pressing a button with a picture of a horn on it.

[willowstreetguzziguy]

Hi,

 I mounted my Stebel horn yesterday as shown making a bracket that connects to the oil cooler.

Looks just like mine! Good job. If you look close at my photos, you’ll see I made a fender extension to keep road grime off my horns.

[willowstreetguzziguy]

I had to tuck the horn and compressor back in to keep from hitting the front fender when taking it off the center stand