Carb rebuild - 36 PHF tiny green o-ring?

[Cal3]

Hey Guyz,
I am going thru my 36 PHF carbs. I bought rebuild kits and there is one tiny green oring in the kit, all others are the usual black orings. This is the smallest "o" in the kit. I have yet to find such a tiny green oring as I have disassembled and cleaned the carbs. Anybody know where that one goes??

Thanx,
Clay

[rodekyll]

Without a better sense than "tiny", I'm gonna guess - with absolutely no education to the guess - that it goes around either a jet or the air screw shaft, probably in a groove. The color probably isn't significant.  A pic of the bits might help.

[John A]

Is there just the one and is there one in the kit for the other side? Usually the small o rings go on the mixture screw, as David said.

[Antietam Classic Cycle]

I've never used that tiny, green o-ring on any carb rebuild.

[Cal3]

I've never used that tiny, green o-ring on any carb rebuild.

Charlie.....you are making me feel better.

Yeah guyz on your guesses/hints....those areas are where some of the small o's go. But those are all small black orings in the kit, the green one is even smaller.

[guzzisteve]

Another small one goes on the choke jet(plugs into float bowl), then there is another on the accelerator jet.

[rodekyll]

I did say I was guessing.

[Antietam Classic Cycle]

Another small one goes on the choke jet(plugs into float bowl), then there is another on the accelerator jet.

Both black.