LOOP PARTS

[ttietjen]

Other than MG cycles and Harpers Moto Guzzi can anyone recommend more source's for loop frame parts?
Thanks
Tom 

[Turin]

Scrambler Cycle, Moto Guzzi Classics, and Cycle Garden.

[EldoMike]

New or used?

[giusto]

Try Guzzino...and the old stand by...ebay...or maybe this website :)

[Rusty goose]

MG Classics, Antietam Cycle

[ttietjen]

Thanks Guys
Looking for a couple 4 speed Trans parts, first gear bushing & main shaft needle bearing.
Will give these places a try

[Fontain25]

EldoMike has all the USED parts you will need.

[John A]

Scrambler Cycle, Moto Guzzi Classics, and Cycle Garden.

I've had experience with Scrambler Cycle and I trust Kevin with any work he cares to take on. His schedule might be full, most excellent shops sometimes are.  http://www.scramblercycle.com/

[Antietam Classic Cycle]

Thanks Guys
Looking for a couple 4 speed Trans parts, first gear bushing & main shaft needle bearing.
Will give these places a try

"First gear bushing" - sure it's not the 4th gear bushing? That's the most commonly worn or fractured, 1st rarely is in my experience. I had Joe Kenny run off a batch of the 4th gear bushings, they are available from MG Cycle:
http://www.mgcycle.com/index.php?main_page=product_info&cPath=55&products_id=2738

#46 in this illustration is 1st gear, #55 is 4th. #47 and #56 are their bushings.




MG Cycle is presently out of stock on the needle/roller bearing:
http://www.mgcycle.com/index.php?main_page=product_info&cPath=55&products_id=1436

Harper's may have it: http://www.harpermoto.com/03-roller-bearing-17x35x15.html