Author Topic: Suzuki GS1000  (Read 14841 times)

Offline hannibal smith

  • Hatchling
  • **
  • Posts: 76
Suzuki GS1000
« on: February 25, 2019, 12:58:48 PM »




Hmmm. It's an unmolested 1979 GS1000E.

I am helping a buddy restore a Kawasaki, and he drops this off for me (he has 3 of them!). Not sure how to proceed. Keep it stock with a light resto, or build an XR69, or a "Cooley"?

It runs great with 50,000 miles. 2 owner bike, and we know both of them.

Offline Roebling3

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 1497
  • Location: MA
Re: Suzuki GS1000
« Reply #1 on: February 25, 2019, 01:08:10 PM »
Mr. Smith.
Dear sir I would be very pleased to take responsibility for the '69 GS1000E.
I've had several similar Suzuki's (still have one), and loved them all.
   Your new best friend? Seriously. Good fortune, R3~

Offline sidecarnutz

  • Gaggle Hero
  • *****
  • Posts: 976
  • Location: SE Virginia
Re: Suzuki GS1000
« Reply #2 on: February 25, 2019, 01:12:23 PM »
Aw man. I loved those bikes when I was a young man. But having a kid and house payments meant I never got to buy one. If its free to good home, I would make a road trip to pick it up. It would live in a climate controlled garage and get taken out for joy rides on nice days.
yeah, I might be addicted to brake fluid. But I can stop any time I want.

2002 Kawasaki ZR7S
2021 Royal Enfield 650 Conti GT

Offline kfz

  • Gaggle Mentor
  • ****
  • Posts: 385
  • Location: UK
Re: Suzuki GS1000
« Reply #3 on: February 25, 2019, 01:13:40 PM »
Why would you muck with it? Just restore it and keep it standard,  Definitely look at the wiring and check the regulator but Im a fan of the seventies Suzukis rock solid motors, cycle parts a bit meh, but they do what they do. Cant argue with that. 

Kev

Offline Furbo

  • Gaggle Hero
  • *****
  • Posts: 1614
Re: Suzuki GS1000
« Reply #4 on: February 25, 2019, 01:27:00 PM »

Go full 70's. Windjammer faring and clafia bags.
Killeen, TX
'96 Sport 1100
'72 N. Falcone
'72 Eldo

Eccl 9:9,10

Offline RinkRat II

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2280
  • Lake Powell AZ
Re: Suzuki GS1000
« Reply #5 on: February 25, 2019, 01:28:44 PM »

     I'm leanin' towards the Cooley!
             



        Paul B :boozing:
A Miller in the hand is worth two in the fridge.

Offline kfz

  • Gaggle Mentor
  • ****
  • Posts: 385
  • Location: UK
Re: Suzuki GS1000
« Reply #6 on: February 25, 2019, 01:41:29 PM »
Go full 70's. Windjammer faring and clafia bags.

You Yanks are not quite the shilling are you?

Kev

Offline hannibal smith

  • Hatchling
  • **
  • Posts: 76
Re: Suzuki GS1000
« Reply #7 on: February 25, 2019, 01:48:13 PM »
     I'm leanin' towards the Cooley!
             



        Paul B :boozing:

That was my first reaction too! It would be an interpretation, as I wouldn't want to source the correct gauge cluster etc. and it's not originally an "S" version anyways. In stock trim, it's cool, but it doesn't stir me. All I need is a new seat cover if I keep it stock, so that's the easy way.

I am thinking with a "Cooley" fairing, some low bars, suspension mods and some other bits, it would really liven up the ride.

I wish it wasn't so complete, then I could do anything and not feel a bit guilty............. .........but as my buddy always says, "There already  is a perfect example in a museum somewhere." Hmmmmm.

Offline flip

  • Gaggle Hero
  • *****
  • Posts: 1397
  • Aprilia Caponord 1200, Aprilia Shiver, gone MG B11
Re: Suzuki GS1000
« Reply #8 on: February 25, 2019, 01:52:00 PM »
     I'm leanin' towards the Cooley!
             



        Paul B :boozing:

 :bow:
North Carolina

Online bad Chad

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 10009
  • Location: Central Il
Re: Suzuki GS1000
« Reply #9 on: February 25, 2019, 02:24:21 PM »
I had a 78 Gs1000. It really was a great all round super bike.  Super comfortable and a great motor.  Wish I still had one.
2025 V85TT
2016 CSC 250TT

Offline fotoguzzi

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 20011
  • vee git tooh soon oldt und too late wise -my Dad
Re: Suzuki GS1000
« Reply #10 on: February 25, 2019, 02:38:35 PM »
If your getting a new seat cover maybe trim the seat down a little to make it more aesthetically pleasing.. it looks too honking big like it is.
MINNEAPOLIS, MN

Offline hannibal smith

  • Hatchling
  • **
  • Posts: 76
Re: Suzuki GS1000
« Reply #11 on: February 25, 2019, 03:03:04 PM »
If your getting a new seat cover maybe trim the seat down a little to make it more aesthetically pleasing.. it looks too honking big like it is.

I agree. Totally dominant and ugly.

Offline F-22

  • Gosling
  • ***
  • Posts: 125
  • Location: Slovenia
Re: Suzuki GS1000
« Reply #12 on: February 25, 2019, 03:09:44 PM »
I've nothing but good memories of old Suzukis. My dad used to ride a GS850G, even took me on a few long tips when I was around 10.
I think it's the same frame, but the 850 engine was more like the 750, with shaft drive (it also had a kick starter and slide carbs). The seat was Giuliari, fitted on the stock mounts and was a little bit sporty. I remember it was very uncomfortable compared to the stock 850G seat which was amazing but huge.



Very reliable. Only problem he ever had was with the stock charging system. My friend rides a GS550E, and had similar problems. Two years ago, he bought the cheapest Chinese stator and regulator he could find on ebay (both together were some 50€). Didn't have a problem since. It still charges over 13V at idle and 14,5V at max. Some say upgrading to some high tech expensive regulators solves the problems, but at 50€ for practically everything, I don't think the 300€ regulator is even remotely worth it.
« Last Edit: February 25, 2019, 03:11:19 PM by F-22 »

Offline Two Checks

  • Gaggle Hero
  • *****
  • Posts: 6036
Re: Suzuki GS1000
« Reply #13 on: February 25, 2019, 08:48:46 PM »
The big thing on the GS Zooks were valve adjustments (shims) and the carb to manifold boots. And both are still available from the dealer.
1990 Cal III f/f  "Il Duce' III"
1987 1000 SPII "Il Duce' II"

Offline Turin

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 5553
    • FB
  • Location: Chandler, Arizona
Re: Suzuki GS1000
« Reply #14 on: February 25, 2019, 09:10:45 PM »
Another Cooley fan here. I wouldn't build a fake replica though. I'd build a replica of the racer .

2007 Griso 1100
1998 Centauro GT
1997 Daytona RS
1991 Rennsport California III
1991 LeMans 1000
1987 LeMans SE Dave's Cycle Racer
1985 Sidlow Guzzi
1984 LeMans III
1974 850-T Sport
1969 A-series Ambassador
1982 Alfa Romeo GTV6 Balocco SE 3.0

Online bad Chad

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 10009
  • Location: Central Il
Re: Suzuki GS1000
« Reply #15 on: February 25, 2019, 09:25:23 PM »
No idea about now, but back in the day I took my old shims in and exchanged them at the dealer for something like $2 each.
2025 V85TT
2016 CSC 250TT

Offline s1120

  • Gaggle Hero
  • *****
  • Posts: 2199
Re: Suzuki GS1000
« Reply #16 on: February 26, 2019, 05:48:04 AM »
The big thing on the GS Zooks were valve adjustments (shims) and the carb to manifold boots. And both are still available from the dealer.

The 2 valve motors are not bad at all.. Granted not like a Guzzi... but not bad. I lucked out doing my 650 back in the day, that the only adjustment needed, I could swap the two shims and it was fine..  And once adjusted they are VARY stable. frankly one check after the bike had a few K on them, and the clearances would odds are be good till the end of time..  Great motor, and bike.. 
Paul B

Offline chuck peterson

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 5475
  • Location: New Haven CT
Re: Suzuki GS1000
« Reply #17 on: February 26, 2019, 07:59:21 AM »
I worked pit crew for a Zuki ama pro..1979-80..amazing experience...

I've seen a 78 somewhere in New England in the last few weeks...maroon tank decent at under $3

I'll see if I can find it again
"I'd like to thank all my friends who have kept my Guzzi's going, but mostly...TOMB."
150k on Verts
750 Nevada
400f
R5 Yammie
BV250
4x 1976 Moto Demm Smily,, now 5, oops now 6, oops now 7
1980 SP1000 in little bits and pieces

Offline chuck peterson

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 5475
  • Location: New Haven CT
Re: Suzuki GS1000
« Reply #18 on: February 26, 2019, 08:02:23 AM »
"I'd like to thank all my friends who have kept my Guzzi's going, but mostly...TOMB."
150k on Verts
750 Nevada
400f
R5 Yammie
BV250
4x 1976 Moto Demm Smily,, now 5, oops now 6, oops now 7
1980 SP1000 in little bits and pieces

Offline chuck peterson

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 5475
  • Location: New Haven CT
Re: Suzuki GS1000
« Reply #19 on: February 26, 2019, 08:05:40 AM »
This ain't it either but a really nice mate to your blue one....I think the E shaft drive are a great buy, just one step away from "the one" everyone wants makes things a lot cheaper...guzzi content!

https://nh.craigslist.org/mcy/d/ayer-original-82-suzuki-gs1100/6827221689.html




« Last Edit: February 26, 2019, 08:21:15 AM by chuck peterson »
"I'd like to thank all my friends who have kept my Guzzi's going, but mostly...TOMB."
150k on Verts
750 Nevada
400f
R5 Yammie
BV250
4x 1976 Moto Demm Smily,, now 5, oops now 6, oops now 7
1980 SP1000 in little bits and pieces

Offline chuck peterson

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 5475
  • Location: New Haven CT
Re: Suzuki GS1000
« Reply #20 on: February 26, 2019, 08:11:26 AM »
That she blows!.......found it

For race breeding purposes this is the one that started things, not the E drive shaft.....as a near stock bike it looks fantastic too me...id buy that as a historical significant model, buff it up and not do much to it to modify

https://nh.craigslist.org/mcy/d/bradford-1978-suzuki-gs-1000/6815347528.html






"I'd like to thank all my friends who have kept my Guzzi's going, but mostly...TOMB."
150k on Verts
750 Nevada
400f
R5 Yammie
BV250
4x 1976 Moto Demm Smily,, now 5, oops now 6, oops now 7
1980 SP1000 in little bits and pieces

Offline chuck peterson

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 5475
  • Location: New Haven CT
Re: Suzuki GS1000
« Reply #21 on: February 26, 2019, 08:14:14 AM »
Here's the one I want...

one of my photos from back then...Roberto Pietre (sp?) I believe.....notice the hand bent curves on the head pipes...coming down off the hill in the big right hander at Loudon






Not my foto, but as far as Honda vs Suzuki goes.........



« Last Edit: February 26, 2019, 08:18:00 AM by chuck peterson »
"I'd like to thank all my friends who have kept my Guzzi's going, but mostly...TOMB."
150k on Verts
750 Nevada
400f
R5 Yammie
BV250
4x 1976 Moto Demm Smily,, now 5, oops now 6, oops now 7
1980 SP1000 in little bits and pieces

Online Perazzimx14

  • Gaggle Hero
  • *****
  • Posts: 6406
Re: Suzuki GS1000
« Reply #22 on: February 26, 2019, 08:35:16 AM »
Go full 70's. Windjammer faring and clafia bags.

Wasn't it enough that countless motorcycles from the 70's and 80's had to endure Windjammer fairings? Please let us all take part in ending the suffering and let the last few remaining unmolested survivors live the rest of their time w/o fear of one of these monstrosities being anchored on them.

Offline bodine99

  • Gaggle Mentor
  • ****
  • Posts: 400
  • Location: Cecil GA.
Re: Suzuki GS1000
« Reply #23 on: February 26, 2019, 08:59:57 AM »
Go full 70's. Windjammer faring and clafia bags.


 My 81 56,867 miles stator & reg. years ago. Florida to Barber several times great bike

Offline hannibal smith

  • Hatchling
  • **
  • Posts: 76
Re: Suzuki GS1000
« Reply #24 on: February 26, 2019, 10:18:10 AM »
No idea about now, but back in the day I took my old shims in and exchanged them at the dealer for something like $2 each.

I have a small motorcycle shop within 500 yards of my shop- He has a tackle box full of shims. I just do swaps, or pay $4.00 each.

Offline hannibal smith

  • Hatchling
  • **
  • Posts: 76
Re: Suzuki GS1000
« Reply #25 on: February 26, 2019, 10:22:45 AM »
Wasn't it enough that countless motorcycles from the 70's and 80's had to endure Windjammer fairings? Please let us all take part in ending the suffering and let the last few remaining unmolested survivors live the rest of their time w/o fear of one of these monstrosities being anchored on them.

 :grin:

Offline Roebling3

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 1497
  • Location: MA
Re: Suzuki GS1000
« Reply #26 on: February 26, 2019, 10:28:02 AM »
Now how cool izzat? Holding on to your hat, in a turn, while racing.  And the strap buckle bouncing about provides a nagging; Now what, dummy.  R3~ 

Offline wymple

  • Gaggle Hero
  • *****
  • Posts: 1178
  • Location: SE Iowa
Re: Suzuki GS1000
« Reply #27 on: February 26, 2019, 10:34:23 AM »
I still ride my GS850G. Bullet proof motors & transmissions on those 8 valve engines. Valve adjustments are easier than advertised, and a once in the life of the bike thing, but still more trouble than most. Almost nothing ever made is easier than a Guzzi. Get on the GS Suzuki forum, do the wiring upgrades that are recommended and you will be more than happy. These bikes are more top heavy than our Guzzis if it matters to you. I think they are the finest of the Japanese lot.
No trees were harmed by the conveyance of this message, but a lot of electrons were seriously disturbed.

Offline wymple

  • Gaggle Hero
  • *****
  • Posts: 1178
  • Location: SE Iowa
Re: Suzuki GS1000
« Reply #28 on: February 26, 2019, 10:38:34 AM »
BTW, those Windjammers are/were everywhere because they worked, and did so better than anything else. Rode behind a lot of them.
No trees were harmed by the conveyance of this message, but a lot of electrons were seriously disturbed.

Online Perazzimx14

  • Gaggle Hero
  • *****
  • Posts: 6406
Re: Suzuki GS1000
« Reply #29 on: February 26, 2019, 10:47:33 AM »
BTW, those Windjammers are/were everywhere because they worked, and did so better than anything else. Rode behind a lot of them.

When I bought my 850T from Lauri it had a windjammer-esk fairing with it. The deal was if I bought the bike the fairing was the 1st thing to be loaded to make sure it didn't get left behind. He also suggested not tying it down real good in hopes it blow out on the way home.

The only place I see windjammers is periodically one will pop up on CL and the seller asking several hundred dollars thinking they are valuable. I set mine along the curb for free and even the trash man turned his nose up at it. Ended up taking it to bulk trash where they reluctantly took it, and they take just about anything. 

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here
 


NEW WILDGUZZI PRODUCT - Moto Guzzi Door Mat
Receive donation credit with door mat purchase!
Advertise Here