Front footpegs V7III same as Hayabusa?

[Blixten]

Hello

Thinking of getting lowered footpegs for my V7III and found a post where someone wrote that the Hayabusa has the same fitment of footpegs as mine.
Can someone confirm this before I order random stuff of the interweb?
I have seen the Knight design ones which looks really nice but quite pricey, so looking for other options and came across these

https://www.ebay.com/itm/275432725277?var=576058748625

[red stripeguz]

Those look like it should work. I have a V7 850 but I think pegs are same. Not sure about 'Busas but I know Honda CBR pegs work

[Kev m]

I don't think I've ever heard someone bother comparing parts of a Hayabusa to a V7III.

But maybe the retailer or a Hayabusa owner can help you. What you need to know is the thickness of the pivot on the peg in question.

I quick check on my V7III (without removing the peg) suggests the pivot is 22mm thick. So that's your target.

However I'll warn you the pegs are already pretty low on a V7III so if you lower them another 25mm or so be ready to use exaggerated body English in turns or you may start scraping pegs/touching down more than you're used to.

I won't lower my V7III pegs for that reason, though I do have the Knight Design pegs on my MkI because it had a tighter rider triangle with taller pegs to begin with.

[Blixten]

Those look like it should work. I have a V7 850 but I think pegs are same. Not sure about 'Busas but I know Honda CBR pegs work

Thanks, the Busa was just mentioned in a post, but looks like the CBR are very similar as well

[Blixten]

Thanks, the Busa was just mentioned in a post, but looks like the CBR are very similar as well

Thanks for checking, I´m aware about the low footpegs original, so don´t want to go further than 25 mm (1")

[Alfetta]

dang things look pain full....

[red stripeguz]

dang things look pain full....

The ones I got are similar and I like them a lot better than stock. Easier to move foot around and just slightly lower to fit my long legs

https://www.ebay.com/itm/326094915656

[Blixten]

The ones I got are similar and I like them a lot better than stock. Easier to move foot around and just slightly lower to fit my long legs

https://www.ebay.com/itm/326094915656

They look quite nice, is it a bolt on fitting with spring and all to the V7?

[red stripeguz]

They look quite nice, is it a bolt on fitting with spring and all to the V7?

Yes, removed spring, clip and stud from old peg, reused on new peg

[Vagrant]

The 2012+ Honda Goldwing pegs work and are 10MM lower and much wider. After market ones are on Amazon.

[mechanicsavant]

I was surprised to find that BMW foot pegs also interchangeable. I tried putting R 1200r pegs on my V7 , looking to reduce vibration. No major difference, so back to OEM pegs !