« previous next »
Pages: [1]   Go Down

Author Topic: cant find bearing !!  (Read 4606 times)

guzzig5

  • Guest
cant find bearing !!
« on: June 25, 2015, 03:05:00 PM »
5 speed gearbox , main /cluster shaft
Front of transmission (MG# 92256218):
17 mm ID × 35 mm OD × 15 mm wide - this is a needle bearing
Durkopp 10-2762
RIV NAS 17
Torrington 10-2762
Timken 10-2762

Where can I find one of these ? Also could I swap this out for a single roll ball ?
Logged

guzzig5

  • Guest
Re: cant find bearing !!
« Reply #1 on: June 25, 2015, 03:22:42 PM »
Looks like harper has one for 78 dollars . yikes !
Logged

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 14800
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: cant find bearing !!
« Reply #2 on: June 25, 2015, 03:50:04 PM »
Logged
Charlie

Vasco DG

  • Guest
Re: cant find bearing !!
« Reply #3 on: June 25, 2015, 04:39:37 PM »
Note that the bearing has an oil gallery around the outside and there are drillings to allow the ingress of oil through these to the needles. You can get a MUCH cheaper, dimensionally identical bearing that doesn't have the gallery and drillings. It won't last very long. Also do NOT use bearing mount when installing!
Logged

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 29657
Re: cant find bearing !!
« Reply #4 on: June 25, 2015, 04:49:42 PM »
I'm too lazy to look, but have you tried Motion Industries?
Logged
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
25 Triumph Speed 900
"Social media made y'all way too comfortable with disrespecting people and not getting punched in the face for it."

Mike Tyson

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 14800
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: cant find bearing !!
« Reply #5 on: June 25, 2015, 05:38:04 PM »
Quote from: Chuck in Indiana on June 25, 2015, 04:49:42 PM
I'm too lazy to look, but have you tried Motion Industries?

I haven't tried Motion figuring that if Emerson Bearing can't get it for me, then neither will they. Might be something that Peters Bearings in Germany could supply, but would most likely cost the same with shipping.
Logged
Charlie

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 14800
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: cant find bearing !!
« Reply #6 on: June 25, 2015, 05:46:36 PM »
Logged
Charlie

Offline RinkRat II

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2263
  • Lake Powell AZ
Re: cant find bearing !!
« Reply #7 on: June 25, 2015, 05:47:31 PM »
 Kaman if  Motion doesn't have it . :popcorn:

    Paul :boozing:
Logged
A Miller in the hand is worth two in the fridge.
20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here
Pages: [1]   Go Up
« previous next »
 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here