I sold off my Lincoln Easy Mig 280 and Miller Ac/Dc Thunderbolt stick welder for this new ESAB Rebel 3 in one unit.
This is a 110/220V MIG / TIG / Stick
The easy to follow chart inside the side cover tells you what to set the digital controls to for wire speed, voltage and amperage, you can store the MIG settings and recall them latter.
Wow! is it easy to use, I welded two thickness of steel pipe to steel washers, followed the settings, turned on the unit and it welded without splatter, with deep penetration, no fuss at all!
A little bit of grinding and the weld is done.
Looking forqard to trying out the TIG, I bought the foot pedal for TIG welding.
For stick weldiong the digital display promts you for the rod type and diameter and the thickness of the steel you are welding.
It also takes a spool gun for aluminum.
It comes with a 110V patch cord, a Victor regulator and Tweco Tog Gun and rod holder.
These have been selling out as fast as dealers can get them on the shelf, I waited two months to get mine.
This is a lot of welder for under $2K and a 2 year warranty.
