« previous next »
Pages: [1]   Go Down

Author Topic: Dyna 3 timing with engine out?  (Read 1737 times)

jwinwi

  • Guest
Dyna 3 timing with engine out?
« on: February 01, 2016, 12:30:06 PM »
I have the instructions from Dyna and they seem to make sense. Question: can I set up a battery and test light with the engine on the bench to confirm proper timing?
Thanks in advance!
Logged

Offline NCAmother

  • Gaggle Hero
  • *****
  • Posts: 868
Re: Dyna 3 timing with engine out?
« Reply #1 on: February 01, 2016, 12:59:37 PM »
Yes and No.  If you have a lot of money you can have race engine shop set your timing.  But, that is  much different than have rear wheel hp loss, electric signals, etc.  You should at least build the bike and then try to start it.  It shouldn't be too difficult to spin the distributor or even change cam timing.
Logged
Howdy

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • Posts: 29688
Re: Dyna 3 timing with engine out?
« Reply #2 on: February 01, 2016, 01:01:45 PM »
Quote from: jwinwi on February 01, 2016, 12:30:06 PM
I have the instructions from Dyna and they seem to make sense. Question: can I set up a battery and test light with the engine on the bench to confirm proper timing?
Thanks in advance!

I've not done the Dyna 3, but I've done the Dyna S that way, so I'd assume, yes.
Logged
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
26 Triumph trident 800
"Social media made y'all way too comfortable with disrespecting people and not getting punched in the face for it."

Mike Tyson

NEW WILDGUZZI PRODUCT - Moto Guzzi Door Mat
Receive donation credit with door mat purchase!
Advertise Here
Pages: [1]   Go Up
« previous next »
 


NEW WILDGUZZI PRODUCT - Moto Guzzi Door Mat
Receive donation credit with door mat purchase!
Advertise Here