Fellow Geese: Thank you. I was able to track down a thread that already dealt with my issue. But, I took some great pics so I thought I would share.
Here is the old thread that help me:
http://wildguzzi.com/forum/index.php?topic=73127.0My obvious problem.....
Dry above the starter.....
Wet below the starter.....
Remove starter.....
Probable culprit....
That line goes down to the crankcase....
Remove line.....
While removing that I noted the remaining hose was quite loose down into the protective sleeve. I removed the protective sleeve and found the same issue as Sib: the single use hose clamp wasn't actually clamping anything. I was able to remove it quite easily without breaking the clamp....
Check to ensure the factory installed the one way valve correctly (they did):
Flowchart....
So, I'm off to the parts store for three hose clamps now.
