Author Topic: Reproduction Moto Guzzi Tool Pouch (Read 7169 times)

canuck750 · « **on:** March 25, 2019, 03:11:17 PM »

I am planning on reproducing the green waxed canvas Moto Guzzi tool pouch that came with the 1972 ~ 1974 V7 Sport. Maybe this was the same pouch that came with the Loop frame bikes??

I have an original tool pouch that I have measured and made a pattern of and I have bought one square yard of "100% Waxed Cotton Outdoor Waterproof Canvas Fabric - 15 oz" which appears to be a good copy of the original fabric. I found a snap hasp kit online that has a decent assortment of snaps close in appearance to the original. I got the fabric online from Big Z Fabric www.bigzfabric.com - Item # 223394982974 - colour olive.

I am planning on talking to a tailoring shop to see what they will charge for sewing each pouch and what a bulk order would cost, using up the full yard. I plan on keeping three for myself and selling the rest if there is interest.

I am just trying to gauge if there is any interest out there for one of these, I hope to get them done for under $40.00.

If you are interested in one let me know.

kidsmoke · « **Reply #1 on:** March 25, 2019, 03:24:43 PM »

I'd be innerested.

Pics of the original available to give a sense of what's in store, for those of us not fortunate enough to have seen one?

canuck750 · « **Reply #2 on:** March 25, 2019, 03:34:55 PM »

The tool pouch is app. 4" wide x 7" tall with a fold over cap that snaps to the lower body. the seams are folded over and then through stitched.

This is the pattern if someone wants to make their own.

Cam3512 · « **Reply #3 on:** March 25, 2019, 04:35:21 PM »

I am also interested. I'll take 2.

Cam

JACoH · « **Reply #4 on:** March 25, 2019, 06:21:05 PM »

What? You're not going to silkscreen the MG logo on it?

Cam3512 · « **Reply #5 on:** March 25, 2019, 06:56:08 PM »

I have a couple originals. One in green canvas, the other in a black vinyl "naugahide". I "think" the black was loopframe, canvas was V7 Sport? Regardless, both wear holes with all the tools packed in for so many years.

Travman · « **Reply #6 on:** March 25, 2019, 10:10:26 PM »

I am interested. I could use two. Thanks for taking on this project. I’ve seen one of these before, but as Cam said, holes get worn into the bottom from the tools rubbing over the years.

canuck750 · « **Reply #7 on:** March 25, 2019, 10:15:35 PM »

Mine has holes in the bottom from the tools as well.

I can fit 16 patterns exactly on 1 square yard of material, tomorrow I will go to a local tailor shop to see if they will take this on. I will sell them 1st come 1st served in order of who is responding here, hopefully I can get them sewn for a reasonable cost.

I will keep you posted

Cheers

Jim

mtiberio · « **Reply #8 on:** March 25, 2019, 10:18:32 PM »

Check on Alibaba, the Chinese probably already make one...

Texas Turnip · « **Reply #9 on:** March 26, 2019, 06:54:03 AM »

The original is one tough scamp. Mine has been on many bikes since 1971 and is still usable. Guess I should put mine in the safe. lol

Tex

cliffrod · « **Reply #10 on:** March 26, 2019, 07:20:36 AM »

Quote from: canuck750 on March 25, 2019, 03:34:55 PM

The tool pouch is app. 4" wide x 7" tall with a fold over cap that snaps to the lower body. the seams are folded over and then through stitched.

This is the pattern if someone wants to make their own.

https://i249.photobucket.com/albums/gg217/canuck750/CRASH/Moto%20Guzzi%20Tool%20Pouch%20pattern_zpsiq5iv8nb.jpg[/img]

Thank you for the pic and pattern, Jim- your generosity is much appreciated.

The tool kit for my Sport was long gone when I got it. I've had a G5 toolkit & pouch on the bike for many years. Now maybe my wife will sew up a more authentic-looking pouch for me...

Air-Cooled · « **Reply #11 on:** March 26, 2019, 07:31:26 AM »

Mine is green canvas and I do not believe it is waxed (1973 V7 Sport).

Don G · « **Reply #12 on:** March 26, 2019, 08:38:42 AM »

Here are some photos of the one from my 73 Eldo, the one from my 74 model is the same as well:

Hope these help.

canuck750 · « **Reply #13 on:** March 26, 2019, 09:42:18 AM »

Quote from: Don G on March 26, 2019, 08:38:42 AM

Here are some photos of the one from my 73 Eldo, the one from my 74 model is the same as well:

Hope these help.

Thanks for the pictures Don!

Looks like Guzzi went upscale for the Loop frame bike tool pouch with the extra border trim.

Gearhead · « **Reply #14 on:** March 26, 2019, 01:34:45 PM »

I will take one. Thanks for doing this.

Don G · « **Reply #15 on:** March 26, 2019, 02:46:45 PM »

Not a problem! I thought that your tool bag looked different than mine, figured I would submit a picture or two, if your doing it it may as well be done correct, eh? DonG

lazlokovacs · « **Reply #16 on:** March 26, 2019, 05:33:37 PM »

I'll take 2 please

good work

canuck750 · « **Reply #17 on:** March 26, 2019, 11:01:48 PM »

I found a seamstress to sew the pouch for me, she should get 16 out of the yard of fabric, will take a week or so to make them.

I will have thirteen for sale, I am asking $35 USD + $10 shipping regardless of how many purchased.

Will conform once the order is done.

redhawk47 · « **Reply #18 on:** March 26, 2019, 11:32:08 PM »

A couple of comments on your pattern:
The flap does not need the fancy cutting and folding. Just fold the corners and then the top.
But first: stitch the pocket inside out with a quarter inch margin. Turn right side out and stitch the pocket 1/8" from the edge and fold the edges of the flap and stitch them 1/8" from the edge. Then fold the flap corners and the end and stitch them. I don't know when the snaps go on; it depend on your snap machine and whether the snap is exposed on the outside of the flap.

Dan

kidsmoke · « **Reply #19 on:** March 27, 2019, 07:44:05 AM »

pretty sure by your statement I'm at the head of the line, but just to confirm. Yes, One please.

canuck750 · « **Reply #20 on:** March 27, 2019, 09:34:39 AM »

Just tallying up the spoken for list; thanks guys,

Kidsmoke -1
Cam3512 - 2
Travman - 2
Gearhead - 1
Lazlokovacs - 2

G5 · « **Reply #21 on:** March 27, 2019, 06:45:58 PM »

Yes, one please.

JC85 · « **Reply #22 on:** March 27, 2019, 07:41:26 PM »

Quote from: Texas Turnip on March 26, 2019, 06:54:03 AM

The original is one tough scamp. Mine has been on many bikes since 1971 and is still usable. Guess I should put mine in the safe. lol

Tex

Same here. I still have the original one in the toolbox of my 74 Eldorado, no holes and in good shape. I may think about ordering one of these,though, just so that I have a new one, when this one goes kaput.

JC85 · « **Reply #23 on:** March 27, 2019, 08:50:18 PM »

Quote from: Air-Cooled on March 26, 2019, 07:31:26 AM

Mine is green canvas and I do not believe it is waxed (1973 V7 Sport).

I stand corrected. This is the one that I have in my Eldo toolbox. That's what u get for not reading the entireite thread before offering comment

canuck750 · « **Reply #24 on:** April 02, 2019, 03:16:13 PM »

Quote from: canuck750 on March 27, 2019, 09:34:39 AM

Just tallying up the spoken for list; thanks guys,

Kidsmoke -1
Cam3512 - 2
Travman - 2
Gearhead - 1
Lazlokovacs - 2
G5 - 1

I think I have a total of 6 not spoken for yet.

I fitted my tools inside to be sure they all fit... they do

I picked up the completed tool pouches from the tailor shop today, they did a fantastic job!! I am really pleased.

For those that want them please send a PayPal payment to jcarey@br2architecture.com $35.00 US dollars each + $10.00 shipping regardless of how many purchased. I will try and get them in the mail on the weekend. I am going to be away from April 10 to 17th so if I don't hear from you before April 10th I will get back to you on the 18th.

BE SURE TO SEND ME YOUR MAILING ADDRESS WITH THE PAYPAL MESSAGE

canuck750 · « **Reply #25 on:** April 03, 2019, 06:24:30 PM »

earemike · « **Reply #26 on:** April 04, 2019, 05:15:45 AM »

I’d be in for two mate

JJ · « **Reply #27 on:** April 04, 2019, 09:30:30 AM »

Quote from: canuck750 on March 27, 2019, 09:34:39 AM

Just tallying up the spoken for list; thanks guys,

Kidsmoke -1
Cam3512 - 2
Travman - 2
Gearhead - 1
Lazlokovacs - 2

I'll take one (1), and agree with others that you should somehow emboss the Moto Guzzi logo on it!! That would be a nice finishing and unique touch, (IMHO)

canuck750 · « **Reply #28 on:** April 04, 2019, 10:30:02 AM »

"you should somehow emboss the Moto Guzzi logo on it!! That would be a nice finishing and unique touch, (IMHO)

"

I want this batch to be stock copies, maybe on another batch if I decide to get more made, my tailor was kind of excited about making them, one of my sons' knows a screen printer that maybe could get silk screened logos

I would like to get some red waxed canvas to make a copy of the Benelli 650 Tornado tool pouch, anyone have or know where I could get pictures and measurements of a stock Benelli 650 tool pouch???

Kidsmoke -1
Cam3512 - 2
Travman - 2
Gearhead - 1
Lazlokovacs - 2
G5 - 1
Turnin - 1
Earmike -2
JJ -1

Three Left

For those that want them please send a PayPal payment to jcarey@br2architecture.com $35.00 US dollars each + $10.00 shipping regardless of how many purchased. I will try and get them in the mail on the weekend. I am going to be away from April 10 to 17th so if I don't hear from you before April 10th I will get back to you on the 18th.

BE SURE TO SEND ME YOUR MAILING ADDRESS WITH THE PAYPAL MESSAGE

I will be making a trip to the post office today to mail out those that have sent a PayPal and provided their shipping address.

kidsmoke · « **Reply #29 on:** April 04, 2019, 01:12:39 PM »

I got to it. Sorry, been busy and distracted. Thanks for doing this.

News:

Author Topic: Reproduction Moto Guzzi Tool Pouch (Read 7169 times)

canuck750

canuck750

canuck750

canuck750

canuck750

canuck750

canuck750

canuck750

canuck750