Author Topic: v65 c carburator  (Read 200 times)

Online nbags

  • Sunday Rider
  • **
  • *
  • *
  • Posts: 67
v65 c carburator
« on: May 22, 2019, 08:12:40 AM »
trying to find a picture of this carb it is phbh 30 (us) model the atomized has a spring and a plunger  looking thing  this carbs were apart and i cant find picture of breakdown of this carb anywhere. thanks so much.

Offline guzzisteve

  • Guzzi Hero
  • *****
  • Posts: 8520
  • "Just Ride It"
Re: v65 c carburator
« Reply #1 on: May 22, 2019, 08:36:54 AM »
Not to hard to find--  Parts & service manuals  ---http://www.guzzitek.org/gb/accueil_gb.htm

Large selection of DelOrto info here-----http://www.thisoldtractor.com/moto_guzzi.html
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

Online nbags

  • Sunday Rider
  • **
  • *
  • *
  • Posts: 67
Re: v65 c carburator
« Reply #2 on: May 22, 2019, 08:50:20 AM »
i have check neither
one has exact carb

Online Antietam Classic Cycle

  • Guzzi Hero
  • *****
  • *
  • *
  • Posts: 9818
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: v65 c carburator
« Reply #3 on: May 22, 2019, 08:56:02 AM »
The "spring and plunger looking thing" are parts of the accelerator pump, much the same as a VHB 29 or 30. 
Charlie
http://www.AntietamClassicCycle.com
'69 V700
'69 Ambassador
'76 Convert
'13 V7 Stone

Offline guzzisteve

  • Guzzi Hero
  • *****
  • Posts: 8520
  • "Just Ride It"
Re: v65 c carburator
« Reply #4 on: May 22, 2019, 01:21:44 PM »
USA had the atomizer w/pump. In EU they had a different atomizer similar to PHF's and a main jet in the float bowl. I used to order those EU carbs to replace the USA set-up because you could get parts.
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

Online Antietam Classic Cycle

  • Guzzi Hero
  • *****
  • *
  • *
  • Posts: 9818
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: v65 c carburator
« Reply #5 on: May 22, 2019, 02:57:00 PM »
nbags - If you need to know how they go back together, it's pretty much the same as the VHB (except the slide is round of course  :wink:). Here's a helpful "how to": http://thisoldtractor.com/moto_guzzi_loopframe_carburetor_rebuild_-__vhb.html
Charlie
http://www.AntietamClassicCycle.com
'69 V700
'69 Ambassador
'76 Convert
'13 V7 Stone

Online nbags

  • Sunday Rider
  • **
  • *
  • *
  • Posts: 67
Re: v65 c carburator
« Reply #6 on: May 22, 2019, 04:38:06 PM »
thanks so much thats all i needed

 

20 Ounce Stainless Steel Double Insulated Tumbler with donation credit
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here