New Moto Guzzi Door Mats Available Now
The V9 is not that lame out of the factory. Check everything. Start with tire pressure and work all the obvious easy items.I've ridden several and while I am one of the first to recommend upgraded suspension I've never ridden a new small block that even lived in the same zip code as dangerous.And not for nothing, but did they even road test the bike prior to delivery, and if so, who, and for how long over which roads?
When you said the bike has 100 miles on it, does that mean you bought it new? Or did you mean that you bought it used and put on 100 miles?Either way, if you purchased from a dealer, I would have them assist you setting the sag while sitting on the bike strapped and chocked. A bike shouldn't ride like it has no suspension. It sounds like it's too stiff. If that doesn't improve the ride with adjusters, then it might need an upgrade or different springs.
What your describing is almost certainly not what a tank slapper is, but I get that it may have caused the bike to jump and beat you up.In my opinion, the rear shocks on v9s are way to unforgiving, I'v ridden two with stock shocks and they were killer on anything but the smallest bumps/potholes. I then rode one with Ikon shocks, and the difference was night and day.
One thing I just noticed, they delivered it with the very low pressure in the tires. I should never trust a dealer when it comes to this and shame on me for not double checking.
Maybe it wasn't a tank slapper but the handlebars definitely developed a mind of their own momentarily. Scary stuff. Which Ikon shocks were they if you can recall?I can get Ohlins S36PL from Europe for about $750 or look local for Ikons 7610 and save myself some money. https://www.af1racing.com/store/Scripts/prodView.asp?idproduct=80534&sku=MG76101684&description=Ikon+Rear+Shock+Pair+for+V9%27sNot really sure what I need or if the Ohlins are far superior/overkill for my needs.
on my 2018 Milano the suspension was stiff as you describe, I read on a forum the rear was calibrated for a 300 lb. riderI weigh 230 lbs. I backed off the bottom lock rings about 1/2 to 3/4 of an inch which made a big difference.also make sure your tire pressure is correct front & rear with a gauge not eyeballing it
Where'd you pic it up, Wide World WC or?!?
Go see Roland at Spare Parts (6th and Vine) He's a very competent mechanic, but not necessarily current on the newer stuff. They haven't been a dealer for a very long time.
I know Roland. He's a good guy and I've used him for previous bikes but his advice on suspension seemed a little light. I have no doubt he can get any engine running but he did mention that Ikon is what he would use. Thanks for the advice everyone.1 - first thing I will do is get the tire pressure right.2 - if it is still horrible I'll figure out how to adjust sag. I hear its a two man job so I will have to get someone to help me. 3 - If it is still not to my liking, I'll spring for IKONs. At $350, they might just be a great upgrade. I'm not looking for magic, just a compliant ride for Philly roads.
Hate to say it, but doesn't the bobber have the big fat front tire. That could easily be the cause of tank slapping type behavior.
Sounds like a man with a plan!If you want/need any help isolating Cam and I live in opposite sides of a 100,000 acres forest surrounded by other forests. You can always pop out for a ride, or after this crap is over a beer.Ride safe man!
Kev, I’ll definitely take you up on that offer when all this madness is done with.
Yes, it was Wide World. Nice guys but a little ticked off that they deliver a bike with basically flat tires.