Author Topic: Barn find (Read 2401 times)

Phil/TX · « **on:** August 04, 2020, 10:06:46 AM »

Yep I could call it a barn find as the extra part was in the barn. 2004 Breda 750. With one extra part, and that was a complete engine.

oldbike54 · « **Reply #1 on:** August 04, 2020, 10:10:10 AM »

Cool

Dusty

guzzisteve · « **Reply #2 on:** August 04, 2020, 05:42:19 PM »

This sounds interesting, is current motor trashed? Pretty good find.

Phil/TX · « **Reply #3 on:** August 04, 2020, 08:11:40 PM »

Actually the current engine runs great, but I’m sure a valve adjustment, fuel injector sync, and spark plugs will help.
Only have had half a day to work on it, that consisted of a good wash, removed the huge wind screen, put on some bar end mirrors. After the wash, I discovered that there was not one scratch on the paint, a little wax and like new. Still lots of things to go through, it will be my C-19 project.

moto-uno · « **Reply #4 on:** August 04, 2020, 11:24:14 PM »

So , what did you pay for that little beauty ? Peter

Phil/TX · « **Reply #5 on:** August 05, 2020, 07:08:33 AM »

Peter, that’s not a fair question, as I might want to sell it one day. I’ll just say it was a fair price.

Phil/TX · « **Reply #6 on:** August 05, 2020, 05:53:38 PM »

Clean up and removed wind screen, and mirrors. Looking better already.

guzzisteve · « **Reply #7 on:** August 05, 2020, 08:19:43 PM »

I think you did OK, nice when it works out.

Tom · « **Reply #8 on:** August 05, 2020, 09:04:27 PM »

How do you like that muffler? It should sound really basso profundo.

Phil/TX · « **Reply #9 on:** August 07, 2020, 10:03:33 PM »

The mufflers got to go, for me they just don’t look right. Took her for a 40 mile ride today, EFI light is intermittent, will check wire routing when I pull the tank for new air filter, also put some fresh gas in it, I think when I run a few tanks through it it should smooth out.

Guzikid · « **Reply #10 on:** August 07, 2020, 10:56:00 PM »

May I ask where you got the bar-end mirrors ? I'd like something like those for my 2008........The Kid

bigbikerrick · « **Reply #11 on:** August 08, 2020, 01:28:02 AM »

Quote from: Phil/TX on August 05, 2020, 07:08:33 AM

Peter, that’s not a fair question, as I might want to sell it one day. I’ll just say it was a fair price.

There is nothing wrong , with selling a bike for a profit, after you detail it,and get it all sorted out, and running like it should. Thats why folks pay more for a bike that is "turnkey" as opposed to a fixxer upper.
Rick.

Phil/TX · « **Reply #12 on:** August 08, 2020, 10:14:49 AM »

Quote from: Guzikid on August 07, 2020, 10:56:00 PM

May I ask where you got the bar-end mirrors ? I'd like something like those for my 2008........The Kid

Got the bar ends on amazon, I had them in a box, and was lucky to find them,as I have stuff all over the place😀

Phil/TX · « **Reply #13 on:** August 19, 2020, 09:55:49 PM »

Up date, new tires, exhaust, wind screen, now looking for shocks!

Tom · « **Reply #14 on:** August 20, 2020, 01:46:01 PM »

What kind of mufflers did you put on it? What did you do with the take-off?

Phil/TX · « **Reply #15 on:** August 20, 2020, 03:28:38 PM »

I have the take off mufflers, if your interested let me know, I’m sure we can work things out.

Tom · « **Reply #16 on:** August 20, 2020, 03:33:05 PM »

I'll pm you.

Calijackalbob · « **Reply #17 on:** August 25, 2020, 08:05:02 AM »

Quote from: Phil/TX on August 19, 2020, 09:55:49 PM

Up date, new tires, exhaust, wind screen, now looking for shocks!

Nice pipes. Like the ones i got from ebay $95. I got the local exhaust place to make up some extensions for the headers so i could use the original exhaust bracket. Now just waiting for heat shields to arrive to hide the join.

My Breva is undergoing surgury, here is a teaser of how it looks now.

Phil/TX · « **Reply #18 on:** August 25, 2020, 10:09:22 AM »

Did the v7 lll tank fit the breva with the stock seat?

Phil/TX · « **Reply #19 on:** August 25, 2020, 10:12:20 AM »

Send mor pictures of your breva and tell what fit and what didn’t.

Calijackalbob · « **Reply #20 on:** August 25, 2020, 11:56:47 PM »

Quote from: Phil/TX on August 25, 2020, 10:12:20 AM

Send mor pictures of your breva and tell what fit and what didn’t.

Hi Tex.

I'll be doing a build thread when I'm a little further along, but briefly,
I used the plastic V& tank, because it has the fuel pump at the back (the steel ones have it mounted on the side, up front.)and I just transplanted the Breva pump.
The posts that hold the forward tank rubbers had to be shortened by about an inch each side because the V7 tank is narrower.

The coils had to be relocated under the spine of the frame, cos the Breva tank is narrower in that section... This is a before pic. I'm pointing at the bit that hits the tank.....

The triple clamp's handlebar riser bolt housing had to be ground down so it doesn't hit the tank....

In this pic you can clearly see the rubber and the nut holding the risers. Normally it is hidden in the tube......

The front of the seat had to be cut down and re-shaped to fit the tank. (Still a work in progress, I'll consult the upholsterer to make sure I've put enough fibreglass on the seat pan for him to have enough to work with...)

and the bottom of the seat was cut in line with the frame to accomodate the Le Mans sidecovers....
I also cut down the footrest hanger plates and polished them up to make room for the sidecovers. This is what it looked like on sunday. Still riding it during all these mods..

Here's a quick look at the bike and a listen to my $95 pipes.
https://www.youtube.com/watch?v=d0DjislzcyU

News:

Author Topic: Barn find (Read 2401 times)

oldbike54